Jump to content
SAU Community

Recommended Posts

Any word on the nistune?

I want better fuel Econ, so piggy backs are a waste of money.

Nistune won't help much with economy over an Emanage Ultimate, as leaning out cruise mixtures slightly isn't going to save you bucket loads of fuel. Keep the car stock if you want good economy, or buy something lighter than 2 ton and without a low compression engine.

Nistune won't help much with economy over an Emanage Ultimate, as leaning out cruise mixtures slightly isn't going to save you bucket loads of fuel. Keep the car stock if you want good economy, or buy something lighter than 2 ton and without a low compression engine.

Can't nistune manipulate closed loop? From what I've been reading and what tuners have been telling me, It will work a lot better than a piggy. Should see 50-100k's more per tank.

Just found out it can't manipulate closed loop, but you can turn it off and set your own parameters. Probably not the best idea to mess with that though.

So when they talk about getting more k's out of the fuel, they must mean while on boost which an auto is always on boost. So a piggy isn't such a bad idea. Until it starts to break down.

What would you pick Scotty?

Edited by Stagea97

Can't nistune manipulate closed loop? From what I've been reading and what tuners have been telling me, It will work a lot better than a piggy. Should see 50-100k's more per tank.

Just found out it can't manipulate closed loop, but you can turn it off and set your own parameters. Probably not the best idea to mess with that though.

So when they talk about getting more k's out of the fuel, they must mean while on boost which an auto is always on boost. So a piggy isn't such a bad idea. Until it starts to break down.

What would you pick Scotty?

safc + sitc combo :) Am I right?

So when they talk about getting more k's out of the fuel, they must mean while on boost which an auto is always on boost. So a piggy isn't such a bad idea. Until it starts to break down.

You actually do have a modicum of control over closed loop running when your ECU is one that has VE maps. So that's R34, later Stageas and later SR engines for the most part.

Regardless, the common trick with older ECUs is to isolate the region of the map where you do your most cruise miles and turn off closed loop and lean out just there. That gets you the best bang for buck fuel saving without quite as mcuh risk as just turning off closed loop everywhere (such as the risk is, which is nothing according to some and catastrophic accordiig to others!)

But yes, leaning off the horrid rich on boost mixtures in the stock map and adding ignition timing back in under load also gains you a fair bit of extra economy, even when up it. The problem is that the car becomes better to drive, so you tend to lean on it more and use more fuel anyway! :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, I'm tired. I'm tired because about 4PM yesterday, before today's appointment someone immediately bought my bumper. They couldn't get it any other day as they're on the way back to NSW. So I had to do that big GTR conversion I had been planning. Unfortunately, the information on SAU about what you need and how this is done is incomplete. So what should be a simple bolt on affair, yeah, it's not. Did you know if you use all GTR items the bonnet won't close? This little manuever sent me into about 1am the night before trying to dodge a way to get it closed. I will have to revisit this in the next few days  - or maybe not, I may let a body shop figure it out. It all needs to come up and my motivation to pull the bumper off is low. It also seems to hit things in the bay where the GTT bonnet didn't. Yes I used 100% new OEM GTR items. Today, I had the joy of driving to the dyno looking like this: Given I had roughed in the fuel and given sensible but pretty conservative timing, I didn't really bet on having the car drive out any real difference than when it drove in. Sadly due to a miscommunication and laptop fun and games (and almost bricking the dongle, prayers and firmware updates indeed), I ended up using HP Tuner credits to licence the car that was already licenced. So in the end my laptop was used. It turns out my butt dyno is still well calibrated after all this time. The 325kw was on 74% Ethanol, the 313kw line was on 98. The other line is the 'before' line which was 281kw. While the numbers are pretty low, they're pretty in line with what you'd expect. Even if US dynos bump the whole result up about 50KW, gaining 10-15% is similar gains.  The curve of the cam is pretty much spot on with what was discussed as well. All this said, it still feels bad to not see the number you secretly want to see. Even if the car drove great beforehand, and I knew pretty confidently the car would drive out much the same way it drove in due to the nature of a wellish dialled in LS1 not gaining much if anything at all from being tuned from where it was. As expected, the car isn't particularly sensitive to running it at anywhere between 12.0 and 13.0 - And the initial timing at 20deg and 12.0 made 308KW. So 3 degrees of timing, and leaning it out to 12.7 for 5kw, anything above stopped giving any benefit until E85 (which has an additional 2 deg as before). Car itself behaved entirely fine. I found out that 100C = 1.15V! IAT at about 7pm was 19C. I might mess with the bonnet mounting.. but given the REO NEEDS TO BE CHOPPED TO FIT A GTR BAR this is possibly something I may leave gathering (more) dust until it returns to paint jail.
    • It sounds farrrrrrr too cold at your place Duncan... Here I was thinking our 10 degrees overnight is getting cold...
    • oh yeah, reminded this morning....bin lids frozen shut too
    • In my case not, because of total reno. But yeah.
    • Did you use an electronic speedo drive? Does you speedometer read all the way to 180km?
×
×
  • Create New...