Jump to content
SAU Community

Recommended Posts

What's up guys !

Can someone plz plz give me a hand with this hey,

this is serious driving me insane !! :cheers:

Couple of month ago I bought a 1992 Sliver GTR R32 from

Melbourne for a good price, I only paid $28,000 for it , after the

car passed the inspection from Melbourne, I paid $1,450 to

get it over in Brisbane, then another $900 to register it..

And a couple of weeks ago white smoke starts to come out

form the exhaust, well... I didn't really give a thing in the start,

but it keep on happaning so I took it to the work shop.

I thought it's probably my turbo is getting old,

time to chuck a new one on it.

Unfortunally the mechanic walks out and told me the turbo is

quite fine, so there could be a problem with the engine. so then

we did a Engine Comperssure test, the first 3 cylinders was all good,

but drop the compressure on the last 3 cylinders ...OMG @#$%@& :):);)

and the gearbox oil is leaking .... and all this problems..

This is been bothering me to the max , I have already spend over 30k on the car,

and it just ........

And i thought it passed the inspection in Melbourne, ..

and the guy I bought the car from,

his phone is switched off...@#$@%%

next time I better not buy a car without seeing it hey ..

So.. PLZ.. somebody give me some ideas

where should I go to do a Engine Rebuilt,

I live in Brissy , and also where should I buy clutches,

cos the clutch on the car is gettign sliper and sliper.. @#@$% :D

=Skylineinsane=

Link to comment
https://www.sau.com.au/forums/topic/43693-92-gtr-r32-engine-blowing-up-help/
Share on other sites

Your story with the pre-purchase inspections sounds just like mine.

They didn't check anything and when i actually bought the car it came with a few costly and unexpected problems...Something which i hadn't budgeted for :(

You have my sympathy.

You do get what you pay for with GTR's, but Marty @ John White Racing Engine does a nice job.

I'd be getting a 2nd opinion though.. white smoke? Oil or steam? Under load or cruise? Hot or cold? What are the compression figures?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Please do not connect it to your manifold. If you do, as GTS suggested please record the lot in 4K with good mics attached.   On the factory Skyline, there's a upside down pipe that allows it to breathe, looks like this   
    • For me I'd need some serious justification for why it has blown out.  Have you questioned him on it?  To be honest if you didn't question him right from the get-go on the first invoice that was already way over the initial quote and then you've (presumably) then paid another $1375 on top of the first invoice, then you're pushing shit uphill to get a favourable result now... It was years ago I last got an engineer out but it was around $450-$550 per visit.  That was just to inspect each progress point he gave me for the project.  Is he just doing progress inspections or is he providing engineering diagrams, technical assistance, etc??  If he's not, he's a filthy rip off merchant.  If the $3100 is the final sign off then you need to cop it on the chin, pay it and move on.  If it's not, piss him off and get a new one.  Not many Jeeps I'd value at $10K full stop let alone just engineering fees on a written off, half actual value WOVR Jeep....
    • Oh, yes. If you connected it to the manifold your first drive would be very eventful. Very shit. Very interesting. Perhaps take a video if you feel the need to see. Terminating the breather at the top of the bellhousing is normal/stock. Some gearbox lubes (hello Redline Shockproof) like to foam up a bit and require the breather to be extended up higher, so you don't get spots of smurf jizz staining the floor under your car. Mine is thus right up behind the head. Make sure you fit a u-bend at the top so it points back downward so that dirt and schmutz has a harder time getting into it.
    • Cheers for the replies. So i don't connect it to the manifold I just run the hose high up on the firewall?
    • It doesn't really answer your question...but is the head unit full android or just android auto, are you happy with how quickly it boots and responds, and do you have a link?  If we can identify good Android alternatives it will really help people stuck with Japanese screens. Did it have a separate reverse camera input so you would replace the factory one, or are you just going without now...that would be a pretty big steps back. And finally, do you have a picture of the "wire" that you can't plug in? Most likely it is some sort of aerial that is not too important eg japanese traffic or am radio or something if you haven't noticed a functionality issue
×
×
  • Create New...