Jump to content
SAU Community

Recommended Posts

G'day,

I had a look through the forums to see if this has been covered and couldn't really find anything. Unless I've been searching for the wrong phrases and words, not sure...

How do you find out the history of your car?

Can you find out details relating to it's import/arrival/first sales dates etc? Is REVS the only option?

I'm curious to see what sort of life my GT-R has lived prior to me. I have a vague knowledge of the owner who had it before I did, but he only had it 12 months or so, and as a result, it's life beyond that is a mystery to me.

'Tis nice to have details about our cars' histories, yes.

1) On the Build Plate, there's an alphanumeric code that takes up a whole line. Each letter or number can tell you what your car has (or doesn't have) as it comes out of the factory.

2) Hopefully, there'd be a Japanese Log Book with service stamps in it. Translated, each stamp tells you where the car was serviced and written in when.

3) If SAU Members of NSW would like to book in with JLM at Rydalmere, the English speaking staff might take your VIN# and look up when and through whom your car was imported. JLM are themselves importers and compliancers. It may even be possible for JLM to locate your car's auction sheet/report; but that may take more time.

4) Here on SAU's General Automotive Subforum, you can request through Nissan Fast details about your model by supplying your VIN#

5) Any paperwork from a previous Aussie owner should have a letterhead of the car's servicing. Call them up and ask them if they'll download the car's history of what was done and what was supplied.

6) If paperwork also includes tuning, you can also call the tuner about the car's performance details.

Some of the above, I expect you knew about already!

If you want paperwork of it's history in Japan. You can obtain a de-registration certificate. Depends on your needs though ; if your interested in the Kilometres it racked up there and whether or not it was wound back, this is your best bet. Or to find out the owner's details in Japan ; if you wanted to know....

'Tis nice to have details about our cars' histories, yes.

1) On the Build Plate, there's an alphanumeric code that takes up a whole line. Each letter or number can tell you what your car has (or doesn't have) as it comes out of the factory.

2) Hopefully, there'd be a Japanese Log Book with service stamps in it. Translated, each stamp tells you where the car was serviced and written in when.

3) If SAU Members of NSW would like to book in with JLM at Rydalmere, the English speaking staff might take your VIN# and look up when and through whom your car was imported. JLM are themselves importers and compliancers. It may even be possible for JLM to locate your car's auction sheet/report; but that may take more time.

4) Here on SAU's General Automotive Subforum, you can request through Nissan Fast details about your model by supplying your VIN#

5) Any paperwork from a previous Aussie owner should have a letterhead of the car's servicing. Call them up and ask them if they'll download the car's history of what was done and what was supplied.

6) If paperwork also includes tuning, you can also call the tuner about the car's performance details.

Some of the above, I expect you knew about already!

Hi, thanks for the info. I've had the VIN run through FAST, and checked my build codes against options and whatnot, which is all good. I might have a look at the JLM option and see what they can find for me. Thanks!

If you want paperwork of it's history in Japan. You can obtain a de-registration certificate. Depends on your needs though ; if your interested in the Kilometres it racked up there and whether or not it was wound back, this is your best bet. Or to find out the owner's details in Japan ; if you wanted to know....

Cheers. I'm not worried about the kms or anything, it's got a fresh motor and box, and I bought the car to drive it, not keep it with low kms and not enjoy it. I mainly want to chase the history to see what the car has done during its life. Where it spent most of its time overseas etc. Just curious :)

Thanks for your help / suggestions

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bump on this to not make another post, had a ‘head drain’ leak on me and have the engine out as we speak. Planning on just putting a new freeze plug back in , plug the tapped holes and just be done with that headache.    Now I still want to relieve pressure to allow oil to pass down the blocks returns easier. I’ve seen catch cans with multiple vents help folks with this issue on this forum.  I’m wanting to make my own. I have some pictures here of my setup if anyone can help how I should plumb and design the catch can I would deeply appreciate it !   rb25 Oil upgrades: 1.0mm restrictor n1 pump/billet gears extended crank collar  extended sump with trap doors/w welded fitting    
    • The Frenchy's kit is the way to go forward. A modern compressor that weighs about 1/2 as much, is at least twice as efficient, and will do a good job on R134a. And of course the kit has everything else you need to connect it up and have it work properly.
    • Hey all , I am in the process of having the AC system in my r32 GTST converted from r12 to r134a and I’m being told my compressor has gone bad and I will need a new one. I was wondering if anybody has any suggestions for what is the best route to go aside from dropping $1500 on a new oem one? I did see that Frenchy’s performance garage offers a kit to mount a Toyota compressor, has anybody actually used this kit on their car? Or is there anywhere I could purchase just a clutch? Any help is appreciated.
    • Well, your RB20 ECU loom won't have wires for the boost solenoid, that boost sensor, and possibly one or two other things. There could be differences in seemingly random things like the charcoal canister purge solenoid, because the 25DET has to handle boost in the vacuum system and the 20DE does not. I don't know - I haven't looked. It is very likely that all the most important things are same-same, being the main sensors like AFM, CAS, etc, and the injectors and ignition. Not that you'll need the AFM for the Haltech anyway. I would suggest that you would seriously want to sit down with the pinouts for both ECUs and just go through them and highlight green what is the same, orange what is different/missing, and make a plan from there. It's not going to be difficult. It will either be the same or need to be fixed.
    • yeaaa that's why I haven't done any wiring to the stock ecu harness because I have the haltech, but then that leads me to the other question of "is the pnp harness really plug and play?" or would I have to still switch some pins/wires over because the pnp is for the rb25det neo harness, and not for the rb20de neo harness. was really hoping to find something to spoon feed me since so many people have done rb20neo + t conversions, but man this is rough.
×
×
  • Create New...