Jump to content
SAU Community

Recommended Posts

Happy 2014 Peeps :)
"WHEEL CENTRE - Repairs" and "SAU.NSW" present our 1st Tech Event of 2014

Date:- 1st Feb
Day and Time:- 2pm on Saturday
Where:- 43 Bay St, Botany
Cost:- Free to Members
Hosts:- Ian Raymond along with Craig Cameron

Background:- Formerly Simmons Wheels - a long established firm under Tony Simmons - Ian Raymond B.Eng. and Craig Cameron are pleased to accommodate SAU Members for an afternoon of nibbles, chat and technical stuff about wheels! Many thanks go to these guys who've done the same thing for the Porsche Club and others...

Topics Covered;- Effects of different offsets, Diagnosing wheel problems, Repairing rims, Differences between cast and forged, Rebarrelling, How to care for rims etc

I'll update this Post/Thread as Members post their intention to attend.
If you're not a Member yet, it's about time you joined!

Number is limited to 40 on this one so...
1) MrFijiGold (M)
2) D_I_F (M)
3) GoldZilla (VP)
4) crashdown (E)
5) DekA (M)
6) RiseofBrutality (M)
7) Terry_GT-R34 (E)
8) Pezhead (T)
9) vorse (M)
10) PN-Mad (M)
11) levinboy (M)
12) Aggroman (VP)
13) 533 RYC (M)
14) MR33YO (M)
15) GOD12A (M)
16) Owens (M)
17) GTRKat (E)
18) Pete (M)
19) God_speed (M)
20) Victory (M)
21) Clinton (M)
22) frozenwaffles (M)
23) Tats (P)
24) xntrq (E)
25) nick_7g (M)
26) R34Liner (M)
27) Redline_GTR (M)
28) sycorb (M)
29) TREGTR (M)
30) Moelders (M)
31) ianjb (M)
32) twotwisted (M)
33) Assasin (M pending)
34) Aussie_Delivered_R32_GTR (M)
35) smiik33 (M pending)
36) the spruce moose (M pending)
37)
38)
39)
40)

--------------------------------------------------------------------------------------

Reserve List
a) Watchamacallit (M)
b)
c)
d)
e)

Link to comment
https://www.sau.com.au/forums/topic/436971-s-a-u-tech-arvo-2014/
Share on other sites

Can non members come along?

It IS worthwhile Strick to join up as a Member, so you can come to future Tech Events we've got planned!

Execs CLNSKY and xntrq are also working on a couple now for the remainder of 2014.

We're also sifting through recommendations in the Members' Subforum :)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Has anyone used the billet half-moons that are available to replace the rubber ones at the back of RB cam covers ?  Going to change out my cam cover seals as they are weeping oil and its now driving me nuts. Any advantage to be found ?
    • My muffler was fully customised to suit the car. He mailed me the end caps, I marked up the pipe locations (4 pipes in a single muffler) and he sent it back all welded. Certainly more expensive than a mass produced generic size, but that's hardly surprising. My R32 Exhaust has a Magnaflow muffler in it, if I need generic mufflers then they're usually a safe bet. I've got the Vibrant clamps on the intercooler pipes, just because they're nicer to use than the bolt together ones and not as expensive as a real Wiggins clamp.
    • Yeah. Nah. A grain of sand will take out a ceramic turbine that is doing 100000rpm.
    • Yes, it was checked with the roller rockers installed using a LS7 lifter that had been converted to a solid lifter with a dummy spring at 0 lash with a stock length pushrod. With the Johnson lifters longer pushrods were needed which are now 7.700" and 110 wall. Long thiccbois. People much more knowledgeable than I am are doing the measuring! 
    • Well... New things have arrived... And now I need to really dig into the design of the power steering reservoir.    
×
×
  • Create New...