Jump to content
SAU Community

Recommended Posts

Yes it does , lowering the car puts constant pressure on the strut and pre- loads the suspension , its a short term cheap fix without replacing stock struts .

Like i said , this fixed my problem and very well .

Now i run Bilstiens with Tein lowering springs actually works better for street ride and will outlast any coilover .

Then again coilovers might be your best option to keep stock ride height ?

Bad advice going to pedders ……...

No other changes to toe or camber were made after.....?

Stock ride height, car wandering on the rear end means there is an issue that can probably be fixed easily if the problem is diagnosed. The car is probably toeing out on the rear but until the OP gives us the numbers from the recent alignment it is hard to tell if there is another issue.

Ive had the same issue in the past with my 33 and it was tyre related, pump the rear tyres to 42psi and see it it makes a difference.

Not 550rwkw related rear end wandering all over the road? :P

  • Like 1

you are going to have this issue with or without coilovers, before shelling cash into mods, sort out the fundamental issues first.

you good enough to pick a problem and semi diagnose it. why start ignoring it and hoping large mods will sort it out?

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for that.... If only I could do something once and be happy with that, like some people do....
    • I had no transmission at all so I managed to find a big box manual gearbox from an R34 GTT for an insanely good price in EU. I converted it to push type which cost more than the transmission almost, with parts from Amayama! These engines are very strong and can put out decent power with a properly sized turbo. You can save on money from parts like pistons and rods, and invest those in the transmission and other parts. I suggest you join the RB20 Enthusiasts facebook group, plenty of info and almost daily posts there about 20DE/DET/Neo+T builds. (I hope I'm not breaking any forum rules by mentioning third party platforms, just trying to help the buddy out)
    • Yeah, having tried all of those methods including BBQ+recipro/hacksaw, I ended up buying a bush press kit under $150 that works well, like this: https://www.ebay.com.au/itm/355967727167?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=sfmmuhxgqhm&sssrc=2047675&ssuid=dJvnaZ11TB-&widget_ver=artemis&media=COPY It basically has a range of pushers and cups with threaded rods between to press out a range of large bushes. The problem with any sawing solution is minimising damage to the subframe side, although it probably needs a quick sand afterwards no matter what solution you try due to damage
    • Hi. Thanks for the answer. I do not have instagram 😄 I too considering turbo the RB20DE NEO 🙂 But i think i upgrade the gearbox first or at least buy new.  
    • Just pulled the passenger apart so got a good idea, also the side bracket that pivots the top half is completely cooked.. how I don’t know.. haha and paid $400 also included a photo of the passenger seat! She is mint
×
×
  • Create New...