Jump to content
SAU Community

Recommended Posts

The caltex on main north road in Salisbury is overcharging for e85. It should be around 20 to 25c below 91 unleaded, the last time I checked it was only 5c below. It's a pity as it's on my way to work. Is this the same for all caltex servos?

Reduced range is the only drawback, and jerries can fix that.

United have a great app for finding e85 servos nearby, although it can be slow to be updated.

Scotty you are the E85 man so rather than doing a search can you answer this quickly.

Does the decreased cost of E85 negate the reduced range?

I'm not 100% on the cost of E85 and from what I have read it's about 30% more fuel?

...

Does the decreased cost of E85 negate the reduced range?

...

Have a read of this over at LS1: E85: A Long Term Evaluation.

Based on his data, over about two years, the cost per km of running E85 was pretty much identical to running PULP.

However that was posted in October last year so prices (and how they compare) will have changed again since.

Ive read on here multiple times people saying e85 is cheaper, but you use more lf it so it ends up more expensive. But e85 seems to be about 25-30% cheaper than 98. If you use 25- 30% more fuel, wouldnt you assume itd end up equal? (obviously depending on how you drive.)

*im no mathematician :D

if you drive "sensible" it equals about the same, put your foot in and can almost see the petrol needle drop. on average day to day driving I lost 100kms per tank switching to e85, but pay about $20 less per tank. also made 40kws from the change.

WOW! That answer couldn't be further from truth! E85 will be 1 of the best things you do to your car :) 100 is just 98 with 10% ethanol (I think) will be nowhere near the same power gains or the same driveability 70% or 85% ethanol will offer. If ya not too accelerator happy increased fuel consumption will be minimal with a good tune.. But its hard not using it with the new found powerz lol :)

Dont bother with E85. Too much hassel for the gain. Try united 100. Almost the same power gain without the issues and costly setup of E85.

Just curious, what gains in performance are there from a lightly modified standard turbo car? I have a friend with the following mods who wants e85 but I think the money is better spent elsewhere... Anyway:

Eg rb25 with standard turbo, 12psi, standard motor, pod, fmic, nistune, 3" exh etc?

Making around 190-200rwkw, could he expect the same increases in power as someone with 300rwkw going from 98 to e85?

Been having a read of this thread - is there enough scope in stock RB25 NEO injectors to run e85 with the stock turbo?

Been having a read of this thread - is there enough scope in stock RB25 NEO injectors to run e85 with the stock turbo?

Doubt it... they are pretty small (370cc i think)...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update: I got the magnet out. I bought 3 different flexible magnetic reach tools, but none of them worked. The magnet on the tip was all less than 2lbs of force, so i had to buy a special cylindrical magnet that had a pull force of 9lbs.  The magnet finally came in the mail yesterday, so i got under the car to get to work. The super strong magnet isn't that long, so i only have about 1 finger pinch lengths to hold it. I was so scared when i was going in the hole, that the 9lb magnet would just fly away inside the oil pan never to be seen again, but i had my butt cheeks clenched and finger gripped on that thing so tight, i managed to get it to suck the other magnet out.  It was a victory for me last night.         
    • Yep, pretty much what you said is a good summary. The aftermarket thing just attached to the rim, then has two lines out to valve stems, one to inner wheel, one to outer wheel. Some of the systems even start to air up as you head towards highway speed. IE, you're in the logging tracks, then as speeds increase it knows you're on tarmac and airs up so the driver doesn't even have to remember. I bet the ones that need driver intervention to air up end up seeing a lot more tyre wear from "forest pressures" in use on the highway!
    • Yes, but you need to do these type certifications for tuning parts. That is the absurd part here. Meaning tuning parts are very costly (generally speaking) as well as the technical test documentation for say a turbo swap with more power. It just makes modifying everything crazy expensive and complicated. That bracket has been lost in translation many years ago I assume, it was not there.
    • Hahaha, yeah.... not what you'd call a tamper-proof design.... but yes, with the truck setup, the lines are always connected, but typically they sit just inside the plane of the rear metal mudguards, so if you clear the guards you clear the lines as well. Not rogue 4WD tracks with tree branches and bushes everywhere, ready to hook-up an air hose. You can do it externally like a mod, but dedicated setups air-pressurize the undriven hubs, and on driven axles you can do the same thing, or pressurize the axles (lots of designs out there for this idea)... https://www.trtaustralia.com.au/traction-air-cti-system/  for example.... ..the trouble I've got here... wrt the bimmer ad... is the last bit...they don't want to show it spinning, do they.... give all the illusion that things are moving...but no...and what the hell tyre profile is that?...25??? ...far kernel, rims would be dead inside 10klms on most roads around here.... 😃
    • You're just describing how type certification works. Personally I would be shocked to discover that catalytic converter is not in the stock mounting position. Is there a bracket on the transfer case holding the catalytic converter and front pipe together? If so, it should be in stock position. 
×
×
  • Create New...