Jump to content
SAU Community

Recommended Posts

So you had the Retrofit done?

The reason:

In 1989, the Australian Government restricted the use of refrigerant R12 under the Ozone Protection Act, thus requiring replacement of the use of R12 with the environmentally friendly R134a gas.

R12 to R134a conversion (retro-fitting) for older vehicles conditioned to use the R12 gas, as R12 gas is no longer available to consumers.

Think there is more to it than just changing from R12 to R134a.

Also any shop that is still doing R12 would be putting their livelihood at risk :(

Edit: Had mine retrofitted about 16months back. Going strong and cold

Edited by Sinista32
Link to comment
https://www.sau.com.au/forums/topic/437021-r12a-gas/#findComment-7158423
Share on other sites

Yes it's different stuff though it's called hychill and will more than likely replace 134a , I had the oil changed system evacuated and r134a added lasted one day before over pressure , guys are traders on sau and very good to deal with but my research says maybe too much gas was added or something as 32's are designed for r12 which runs at less head pressure, who did yours? Do you know how much oil and gas was added?

Link to comment
https://www.sau.com.au/forums/topic/437021-r12a-gas/#findComment-7158586
Share on other sites

Hychill will not replace R134a. The only reason it became popular was due to a legislative loophole, which is now being closed.

Meaning, misinformed and unlicensed business/traders were technically able to purchase the gas and consequently service peoples cars.

As an ARC licensed mechanic, my advice would be to take it to a licenced business who knows what they are doing.

Link to comment
https://www.sau.com.au/forums/topic/437021-r12a-gas/#findComment-7158646
Share on other sites

Yes absolutely could be I just worry cause the amount if guesswork with volumes and pressures and if there is a better gas that works at specs posted on the compressor why not look into it? It was actually working very well till the relief valve opened but this other gas is much more efficient and runs less pressure it's used in many older fords and Holden's that are just not suited to 134a anyway I will look into costs as it can be bought locally and see if someone will do it for me otherwise I could but a manifold and DIY

Link to comment
https://www.sau.com.au/forums/topic/437021-r12a-gas/#findComment-7158647
Share on other sites

With the 134 conversion I have spoken to a few shops, some say need new filter and tx valve oil etc some say different hi low switch some say nothing just evacuate and recharge its a bit confusing , at least hychill is seemingly compatable with all systems from what I read

Link to comment
https://www.sau.com.au/forums/topic/437021-r12a-gas/#findComment-7158653
Share on other sites

And I wrote that before your post came up on my phone in case your confused lol I just don't want to go through another compressor, parts cannot be purchased for them so it's second hand or big bucks for a new one if they can still be bought so I was just trying to reduce the workload on the poor old thing but if I can't then I can't

Link to comment
https://www.sau.com.au/forums/topic/437021-r12a-gas/#findComment-7158659
Share on other sites

Yeah that is fair enough, but the thing with air con is that you can't half do it. In for a penny, in for a pound. And you really have to know what you are doing. If you think that's bad, spare a thought for some cool room systems that use 404 gas. Its $300+ per kg.

Edited by White GTS-T
Link to comment
https://www.sau.com.au/forums/topic/437021-r12a-gas/#findComment-7158668
Share on other sites

Yeah that is fair enough, but the thing with air con is that you can't half do it. In for a penny, in for a pound. And you really have to know what you are doing. If you think that's bad, spare a thought for some cool room systems that use 404 gas. Its $300+ per kg.

I did a compressor change on an underground chiller that took over a hundred kilos of r12, most big chillers still use it cos its the shit.

Also fridge gas got a new environmental tax or some such in the last year or so. That's why "$100 regassess" aren't advertised as much anymore, it costs way more in refridgerant.

Link to comment
https://www.sau.com.au/forums/topic/437021-r12a-gas/#findComment-7158759
Share on other sites

The chiller I did was a baby my boss said, at that was only one side of it, it ran parallel compressor ccts. It was cooling water for a swampy that was lucky if it dropped 2deg off ambient air temp, mines have to much money lol. Bit off topic though.

to op change your dryer/receiver and vac out properly and pressure test, then regass while checking your pressures and temps and there shouldn't be any dramas.

Edited by R33shaun
Link to comment
https://www.sau.com.au/forums/topic/437021-r12a-gas/#findComment-7158768
Share on other sites

  • 2 weeks later...

Well I ended up doing it myself after system was professionally evacuated previously . I got a rig , oil with uv and hychill, I know it is probably not legal and frowned upon but what's the difference with other things we do ourselves ? Anyway it's nice and cool pretty easy to do hopefully it lasts if not the can only cost $21 so worth the risk if it doesn't and I will hard wire fan to come on with a/c button too just to help things along.

Scott

Link to comment
https://www.sau.com.au/forums/topic/437021-r12a-gas/#findComment-7169654
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Back in January, I noticed my car felt noticeably weak. I had the injectors cleaned, which seemed to solve the problem -- until now. Recently, the car suddenly lost power again while driving. Suspecting the injectors, I brought it to the mechanic. He recommended replacing them entirely, saying the current ones were getting unreliable and fiddly to work with. I could not find a direct replacement for my current injectors. The closest match I found were 440cc injectors. This led me to look into the possibility of upgrading -- and of course, that would mean remapping the ECU. From my research I found: The OEM Part numbers are 16600-72L20 and 16600-72L21 Both the RB20DE and RB20DET use the same 270cc injectors. There are much better options out there over the old OEM injectors. Nistune could be a viable tuning option. While the RB20DE isn’t explicitly listed on their site, the ECU is essentially the same as the GTS-T version - just with a different map. The ECU code on mine is listed as supported. One concern is finding a tuner who works with Nistune. Aftermarket ECU like Haltech and Link, but this would be the most expensive choice (and possibly overkill for a mostly stock RB20DE) I admit that I am very new to the tuning scene and would appreciate any insight or recommendations regarding this.   These are some SAU links where I got some of my information from for reference: https://www.sau.com.au/forums/topic/380324-rb20de-injectors/ https://www.sau.com.au/forums/topic/477396-factory-270cc-injectors/  
    • The inspectors are not forensic by any means but if you forge your documents and/or badgings on vehicle parts and are found out, the consequences are just far bigger than if you just run illegal parts. And their job quite literally is to cross reference what parts you got installed and what your papers say you got. Something as silly as your suspension being 1mm too low will fail you. Nonetheless I asked if someone knew the damn pipe and I certainly did not ask for smartassery or underhanded comments, no idea why you need to be told this. Great way to waste both our time.
    • As useful as you explaining what forgery is... But then again, I wasn't aware your inspectors were also forensic experts and inspect nameplates on each component to confirm everything is original. They must inspect roughly 3 cars a year at that rate. You're right though, my comment doesn't help you in anyway, so I'll go talk to my wall now. Cheers. 
    • Say that to the guy that is going to fail your inspection or tow your car for illegal exhaust modifications. If you have anything else useful to say, please go tell your wall.
    • You must be fun at parties. 
×
×
  • Create New...