Where To Buy Radiator

[r34unit]

hello gents
im need of a new standard radiator. is there any shop in melb who stock the standard radiator ? preferably south east.
i would go a after market ally one but i want to keep the standard fan and plastic surround !

thanks

[Dose Pipe Sutututu]

Aftermarket ones still retain the stock fan and shroud so do the ling long radiators off eBay

[Sklyn]

^^ what he said. Unless you go too fat that is =)

in my 33 i used 42mm and had no problems at all, i expect 34 will be the same.

the 50mm ones I have heard some fit, some needed a little adjustment.

[Dose Pipe Sutututu]

52mm fits but the fan blades are really close to the shroud and may collect it if there's enough engine movement, also a pain in the arse to fit. It's like Tetris level ultimate full retard

[Dan_J]

fan blade will flex and cut into rad most likely so best to ditch it and run S bladed thermos when using 52mm rad

this place is in hallam
http://stores.ebay.com.au/yycoolingsystemautoparts/

Edited January 3, 2014 by Dan_J

[r34unit]

Is there any cooling difference between the 42mm and 52mm cores ? The car is my daily and only hits the drags on some weekends.

[Ben C34]

No way would you need a52mm rad. How long have you been using the stock One? initial post you wanted a stock one, just get a 42mm one.

[StevenCJR31]

ADRAD will have one

[Dose Pipe Sutututu]

Is there any cooling difference between the 42mm and 52mm cores ? The car is my daily and only hits the drags on some weekends.

just get the smaller one, easier to fit... if you're only doing the drag strip even a stock radiator would be fine.. once you start running laps around a circuit go for the biggest one