Jump to content
SAU Community

Recommended Posts

For sale are some quality parts I consider surplus after a few changes in direction....





1. GT2860-7's with 400km's travelled, 2nd hand cam (exh) broke and bent some valves, rebuilt engine to higher hp spec's than the -7's.


In excellent condition, includes garrett actuators.



Price; $1500.




2. Axxis Hero wheels, 19/9.5 at +22 offset, They have almost new(400km) 265/30/19 Kumho Ku31's , the wheel pictured has the worst rash,


The same wheels in my avatar, Selling due to finding some LMGT1's.



Price; $1500.




3. R33 GTR specific Apexi PFC with hand controller.



Price; $650.




4. Ti front pipe, unknown brand, Learnt the hard way R34 pipes are indeed longer than the R32 & 33's


Pics indicate its good condition.



Price; $500.




5. Kakimoto Hyper Fullmega N1 cat back exhaust in good condition, front section heat wrapped.



Price; $350.




6. CES dump's and matching front pipe, includes adaptors for lambda sensors.



Price; $300.




7. Jjr coil pac's, where replaced with Splitfires which didn't change the issue.



Price; $200.




8. Std R33 RB26 injectors.



Price; $200




9. Std R33 RB26 Crank balancer/pulley, has travelled 400km, upgrading to crank trigger set up.



Price; $200.




10. Chinese?? GTR hard pipe kit...silicon joiners and hose clamps included.



Price; $150




11. 3in Hi flow cat in good condition.



Price; $75




12. Have a std size R33 RB26 crank,


Good condition.



Price; $250




Misc...RB26 rod's and pistons, also a sleeved block which is cracked through to the water jackets from the head studs.


Offers considered....




Happy to post at buyers expense, pick up is fine too....



PM me on here or text to 0418630718.



Cheer's Glen.













post-56086-0-99564400-1388816983_thumb.jpg

post-56086-0-64647600-1388817018_thumb.jpg

post-56086-0-83018500-1388817049_thumb.jpg

post-56086-0-60623300-1388817070_thumb.jpg

post-56086-0-92091000-1388817091_thumb.jpg

post-56086-0-35979700-1388817111_thumb.jpg

post-56086-0-55434400-1388817139_thumb.jpg

post-56086-0-59794100-1388817173_thumb.jpg

post-56086-0-01539700-1388817208_thumb.jpg

post-56086-0-68040200-1388817231_thumb.jpg

post-56086-0-72935300-1388817257_thumb.jpg

post-56086-0-63194900-1388817288_thumb.jpg

post-56086-0-04827100-1388817314_thumb.jpg

post-56086-0-28086800-1388817348_thumb.jpg

Pm's replied...

Also have 2 intercooler's, 1 from an R33 GTR and the other from an R34 GTR, relatively good condition, pic's if your interested.

R33 int- $200

R34 int- $250

  • 2 weeks later...

Gday...

The Ti pipe is 70x2 into 80mm, it will fit under the car no problems but is a fraction longer, off the shelf cat back systems will no longer fit without mods...

Hard pipe kit SOLD and dispatched.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • What are your plans for your blow off valves? Purely plumb back? How soft will the spring in them be? AFM can be tricky to get super smooth and nice, especially depending on the rest of the system, and then can be very easily upset if something slightly changes. IE, even if you run recirc blow off valves, you could still see issues getting it to behave at certain load points as turbos might start to spool, but you release the throttle but it's not enough pressure to crack the bov open to recirc, and you can end up with reversion which can cause double metering, and hence dumping of fuel into the system, and stalling the engine.   If you're going to run a map sensor for closed loop boost control from the ECU, what makes you want to keep the AFM?    
    • It's not bad, it's just not flexible. And say if you have any leaks between the MAF and plenum, well then your load axis goes out the window. Here's a real world scenario, I blew off an intercooler hose last track day, as the clamp decided to Bluetooth itself somewhere. Still continued to do 2 laps and drive it to the pub for a couple of beers then home. Good luck doing that with a MAF setup 
    • Is MAF load really that bad? I'm not trying to do big power, my only real desire is VCAM and flex fuel support so I'm not terrified of blowing my engine apart from CA's appalling 95 RON "premium" fuel. Stuff like playing with closed loop boost control and really dialing in my transient fueling and ignition are frankly just to prove to myself I remembered something from uni.
    • Thats what ive been doing. Ive got a million questions but i know theyve probably all been answered before at some stage. Todays research included nismo heritage seat covers, s3 projector headlight retrofits and how to remove/paint the rocker covers 
×
×
  • Create New...