Jump to content
SAU Community

Recommended Posts

Hey Peeps

Thought I would do a write up as it seems there isn't one anywhere else and the 350Z or G35/V35 isn't the same..........

these colour codes were taken from a double din radio - non bose type.

12V Constant - Yellow/Pink.

12V Switched (Ignition) - Light Green/Pink.

Ground - Red/Blue.

Head Light Signal / Dimmer - Green/White.

Front Left Speaker: White & Black. (do not know polarity)

Front Right Speaker: Red & Green. (do not know polarity)

Rear Left Speaker: Yellow & Brown. (do not know polarity)

Rear Right Speaker: Pink & Blue. (do not know polarity)

There were 5 colours left over but I did not bother finding out what they were.

Cheers, Theo.

Very nice work. How did your replacement stereo fit in the slot? I did mine on the weekend, and I'm not 100% satisfied with the fit, but was in a rush at the time. Now ceebs taking everything apart again.

If you're lazy (like me) and can't solder for shit, I bought this ISO and it works well.

http://www.ebay.com.au/itm/Nissan-1995-stereo-ISO-WIRING-HARNESS-plug-connector-/260669742342?pt=AU_Car_Parts_Accessories&hash=item3cb1209d06&_uhb=1

it didn't sit in that flush either but cant do much about it with the counter sunk screw's.

I don't have a problem with soldering (I'm an electrician by trade) I'd rather know its right and have a good joint, not like these auto electricians who twist it together and tape it LOL

here's a photo.......

post-83704-0-37788300-1388985725_thumb.jpg

  • 3 weeks later...

Hey guys just to add to this, when I wired my speakers to an amp, the wires with a trace are negative and the solid coloured wire twisted with it is the positive one.Cheers

is this not common knowledge.

I'm just adding info to the post josh, as Theo noted in the first part that he did not know the polarity. So I guess you could say it's not common knowledge, or he's not a commoner, or he was taking the piss and I fell right into it.

In electronics line generally means positive.

^ The Focals I wired in use clear speaker cable and the one with red trace (line) is used as positive, which is opposite to the standard wiring setup so yeah...like Brick said. Every manufacturer makes their own rules

Scott can you paste a picture of all the head unit wires???

the Green/White wire and also the Red/Blue wire would be a start though.

need to figure out why my interior lights, parkers and tail lights aren't working........ I've replaced the BCM and still nothing :(

See if any of this helps. It seems the pages after the ones I've printed are predominately about the navi operation & repair.

AVpt1.pdf

AVpt2.pdf

What I normally do is find what I think I need in the English G35 version & then try to find the equivalent section in the Japanese M35 manual (translating where necessary). If there happens to be any changes to wiring terminals/colours etc, you may be able to catch it before cutting the wrong wire.

AV_lowres.pdf

Good luck & let me know if you need more.

Cheers, Leon.

  • 2 weeks later...

DONT NOT GROUND THE RED/BLUE WIRE!!!! it is actually the cabin lights/parkers/tail lights!!!

I think I've blown the BCM by doing so!!! FFS

don't worry, fuse you need is third on left row in the vertical fuse box near the battery, you have to remove the plastic shield in the bottom of the glass to access it!

it is called "tail ***", if i'm wrong on placement. surely you will find the reason in this box :yes:

Edited by Erop

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I much prefer that to an actual oil pressure issue, never would of thought it would of been a volt drop issue but SAU brains win again. Guess ill be turning down the oil pressure limit for the track and hunting some grounds. Ill hopefully update this thread with some high oil pressure and solid ecu voltage logs. 
    • You've just discovered a really good reason to tell yourself, yes, I do need to buy an aftermarket ECU. Put the MAF in the bin. Slap in the new ECU and have a think about what turbo sounds you prefer.  Do you want a 90's style BOV wooosh? Do you want a hektik tsututututu?  Mate, can't go wrong. Just gotta get that ECU and the world is your oyster. 
    • Hi. Iam just curisou about this topic. I saw this video. It is about Greddy Type FV2. I know that BoVs are about that sound but how and when to use it? I read some topic here and from what i have understand on stock RB with MAF there will be some "problems" if you use this BoV? It vents the air in to the atmosphere and the MAF on stock car needs this air back in to the intake and not out? Or is it wrong? If so...i saw you can put some adaptor to circule air back...but does that not "loose" that sound? I saw another BoV from Turbosmart and it has two "exhaust" like ports? One is for the stock tubing for letting air back and one is for "sound" and let the air in the atmosphere? Can someone please explain? This is the Greddy one:  And this is the Turbosmart.     THANK YOU!! EDIT: So i read about this topic some more and i if i understand that correctly: That Greddy can function either like BoV or 100% Bypass valve? And that Turbosmart is what they called hybrid so you can adjust what and how many air can be vented out or back in? Is this right? THX!
    • That dirty voltage drop is the culprit I suspect 
    • i cant get them all in 1 screenshot unfortunately as i just dont know how to move things around tbh, but they are all from the same log and the line crosses at the same point for all of them
×
×
  • Create New...