Wanted To Buy 2014 Onwards

[Chris32]

WTB R34 front reo, prefereably series 1

[sean133]

WTB - set of 32 gtr rims

With or without tyres price must reflect this

Text 0421549607

[Adz2332]

WTB

Brand name Harness dont mind if its out of date

[Adz2332]

Also

R33 series 2 drive shafts

[GeeDog]

^^^ I've got a matched pair of RPM 5 point harnesses for sale. They are just on 2 years old, but are SFI spec so out of date for CAMS use. they don't have the spring clips on the mounting points, but instead have bolt-in plates (ie remove a seat belt bolt, put it through the plate on the end of the harness, bolt it back in). They don't include eye-bolts ('cause they don't need them).They have a "duck-bill" style latch, and the straps are red.

These are the ones:

http://www.revolutionracegear.com.au/index.php?PCID=10413&PSO=245&PSID=9193133&PSV=Primary&CDO=

They were only used three times (actually the passenger side one was only used once). Bought them for a rally-cross event as they were mandatory, then used the drivers one for a track day & a hillclimb. They are as new, except for the date.

Looking for $80 for both, or $50 each.

[Ad's]

Looking for a R31 sedan manual tailshaft

Pm me if you have anything

Thanks

[Adz2332]

wanted

carbon fibre boot r33

[Fingerling]

Hey guys, looking to get my 33 on the road, so I will be needing the following to get it through Regency (I'll probably look for more specifics a little later, more looking to get it driving first.

S2 A/C condenser

S2 intake crossover pipe

S2 dump pipe

S2 front bar - as the wreckers are asking $600 for one, I'll probably just roll with a series one until I can source another, however.

Now as I'm going to have to take it to Regency, I'm chasing stock parts for now. Shoot me a PM on here, thanks.

Edited October 19, 2014 by Fingerling

[CRSKmD]

Wanted:

Recaro Seat rails suit R32

text 0416 580 223 if you have.

needed both driver and passenger

[Snake-eyes-racing-1]

Hard metal intake for a 34 gtt. needs to be able to conect to stop turbo. Also needs to be a minimal of 3.5 inches going a hyper gear high flowed turbo

[Snake-eyes-racing-1]

WTB, Hard metal intake for 34 GTT, Must fit stock turbo. As have hyper gear turbo to go

[Grimesy]

  On 04/11/2014 at 2:09 AM, Snake-eyes-racing-1 said:

WTB, Hard metal intake for 34 GTT, Must fit stock turbo. As have hyper gear turbo to go

If you can afford new, get scotty on here to make you one.

Nice bit of gear, with silicone and lines to match.

[okooko]

WTB

R32 GTR Front Reo bar (pref with N1 vent cutouts)

R32 GTR N1 headlights (non projector type) LHS or set.

[fat exa]

WTB

R32 GTR Front Bar and bonnet preferably in white

[Michael-32]

WTB
R33 series 1 front bar, preferably type m

[Nozila]

WTB r33 gtst rear diff. My welded one has shat itself and the noise is driving me crazy.

[040122]

Im after a series 2 or 3 rb25det stock known to be working AFM , only want a cheapy as im fault finding why my 33 keeps stalling. Will buy any other stock rb25 electrical induction sensors, cheers guys.

[040122]

Im after a series 2 or 3 rb25det stock known to be working AFM , only want a cheapy as im fault finding why my 33 keeps stalling. Will buy any other stock rb25 electrical induction sensors, cheers guys.

[CRSKmD]

WTB:

R32 GTR bonnet latch +brackets

R32 GTR front reo (uncut)

0416580223

[mrRS4]

Im after R34 gtt front struts or RS4 front struts.