Jump to content
SAU Community

Tuning Tips For Your Skyline

White Noise
 Share

Recommended Posts

White Noise Apprentice

White Noise

Posted
Posted (edited)

I was snooping around the interweb when I stumbled across this site and found out a heap of great information that made a lot of sense to me (a newbie). Im not sure as to wether or not there is one on here already and if not I thought this would be a great topic to start.

Please feel free to add your own discoveries from other sites and stuff. This is the best one I found:

http://www.skylineowners.com/forum/showthread.php?t=66975

Enjoy and I hope to hear a lot of discussion pro or con to the information myself put here.

Thank you,

Aaron.

For some reason I cant get the link to paste so I typed it out and still wont work. Any ideas?

Essentially type into google:

RB25DET Tuning Skyline Owners

Its the first one.

Edited by White Noise
Link to comment
https://www.sau.com.au/forums/topic/437404-tuning-tips-for-your-skyline/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      Just a standard sanding block size. With the rock chipa they are quite small. I sanded them as you could feel the edges. 
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Say you've just laid all your filler and your about to start sanding, how large is the sanding block your using?  Like a high fill primer? Technically possible but would be a nightmare. Just guessing from the photo, but they look small enough that you might get away with using a 1k spot putty. Normally you'd use something like this on pinholes but with the type of project you're working on I'd give it a go. 
    • Shizu
      Sheraaz's R34GTT Build

      By Shizu · Posted

      Omg Brake pedal removal.. FML!!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I mean, I can confirm the TPS is at 100%.... I can confirm when we installed the TB and setup the cable that the TB was indeed fully open at max pedal travel.. the same 'curve' (WRT MAP vs MAP) existed with the previous setup/TB/manifold as well... No, we did not do a run with no intake connected. I would love to go back in time to do such a run to rule out the intake. It would have also been good to do a run with the airbox lid off. There's a test there where increased IAT vs more available air could be a positive tradeoff. I remember taking the lid off my R34 Turbo setup back in the day and noticing a monster increase, even if IAT's did go up. Could be similar. Hard to test unless I find a very deserted road. 
    • LaurelPWR
      Forced Performance Hta Turbos

      By LaurelPWR · Posted

      That's actually encouraging to be honest. my motor was rebuild many years ago but it's probably done less than 30,000kms and fucc all limiter or drift, majority street / drag / roll racing. It'll be fine 💪🏼 I don't even have lines or a can for the cam breathers installed yet, there is zero oil residue or splatter on or around them, it drives beautifully so it seems healthy. Just a ticky lifter, yet they're almost brand new oem genuine Nissan and haven't done many kms at all...
×
×
  • Create New...