Jump to content
SAU Community

Recommended Posts

I have a few left over parts for sale that i need to sell to fund a Haltech and 1400cc injectors

RB30 A8 turbo block Has been freashly honed and decked and primed and painted House Of Kolour candy apple red over a gold base will be fine with heat and also comes with a freashly ballanced and preped crank. It is also drilled and taped for 12mm ARP head studs and tensioner is also drilled and taped

(87mm) N.O.: 040727 A8

$500

HKS cams that came with a spool imports race prep head package. These cams are rare and hard to find now. The specs are HKS 272 deg 9.35 lift

$800

Rb26 plenum and throttle bodies

$450

RB30/25 flywheel has been freashly machined and lightend by Direct clutches in brisbane

$150

This is a vid of these cams and this block getting dyno befor the motor was striped down and refreashed. Gives a bit of an idea on the note of the cams

Contact Monty on 0439 592 916 or reply on here pics below

post-40332-0-95705600-1389425263_thumb.jpg

post-40332-0-74075400-1389425282_thumb.jpg

post-40332-0-07829200-1389425302_thumb.jpg

post-40332-0-27009200-1389425315_thumb.jpg

post-40332-0-55106700-1389425331_thumb.jpg

post-40332-0-78712300-1389425352_thumb.jpg

post-40332-0-60462700-1389425373_thumb.jpg

post-40332-0-08558000-1389425390_thumb.jpg

post-40332-0-49926200-1389425406_thumb.jpg

post-40332-0-18511200-1389425424_thumb.jpg

post-40332-0-32088800-1389425441_thumb.jpg

post-40332-0-14080300-1389425456_thumb.jpg

post-40332-0-73791400-1389425474_thumb.jpg

post-40332-0-54584800-1389425489_thumb.jpg

post-40332-0-12449600-1389425505_thumb.jpg

post-40332-0-89947600-1389425518_thumb.jpg

post-40332-0-87620800-1389425534_thumb.jpg

post-40332-0-40148500-1389425553_thumb.jpg

post-40332-0-97661900-1389425570_thumb.jpg

post-40332-0-93586000-1389425589_thumb.jpg

post-40332-0-19841800-1389425605_thumb.jpg

post-40332-0-27716100-1389425621_thumb.jpg

post-40332-0-20592300-1389425637_thumb.jpg

post-40332-0-66535100-1389425655_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/437435-fs-rb30-a8-and-rb26-parts-hks-cams/
Share on other sites

Do the cams use a standard 32mm base circle, is the head relieved for lobe clearance, any part numbers, sorry for all questions, just trying to find out if they are what I'm looking for

yeh the head was machined for lobe clearance. only details that i know is what i wrote down and that they are rare. I didnt want to sell them but need to finishish this motor to get the car on the road been 3yrs now and only need ecu and injectors. sorry i cant help you more. They measure 32.5mm over the base and 41 from the base to the tip of lobe

Cheers for the reply, looking for straight drop in, may go 270 poncam. I feel your pain put a 26/30 as well as many other things in my 33 s2 gtst and spent 3 years off the road also

  • 2 weeks later...
  • 2 weeks later...
  • 1 year later...


  • Similar Content

  • Latest Posts

    • Very nice - I also have a 92 GTST and hardly see any others around these days
    • When I need something else to edit, I use Movavi. A friend who does video editing on a daily basis recommended me) it's an easy video cutter to use for beginners
    • I need to edit some videos for work but I'm not good at all this. Which video editor can you recommend?
    • I think you're really missing the point. The spec is just the minimum spec that the fuel has to meet. The additive packages can, and do, go above that minimum if the fuel brand feels they need/want to. And so you get BP Ultimate or Shell Ultra (or whatever they call it) making promises to clean your engine better than the standard stuff....simply because they do actually put better additive packages in there. They do not waste special sauce on the plebian fuel if they can avoid it. I didn't say "energy density". I just said "density". That's right, the specific gravity (if you want to use a really shit old imperial description for mass per unit volume). The density being higher indicates a number of things, from reduces oxygen content, to increased numbers of double bonds or cyclic components. That then just happens to flow on to the calorific value on a volume basis being correspondingly higher. The calorific value on a mass basis barely changes, because almost all hydrocarbon materials have a very similar CV per kg. But whatever - the end result is that you do get a bit more energy per litre, which helps to offset some of the sting of the massive price bump over 91. I can go you one better than "I used to work at a fuel station". I had uni lecturers who worked at the Pt Stanvac refinery (at the time they were lecturing, as industry specialist lecturers) who were quite candid about the business. And granted, that was 30+ years ago, and you might note that I have stated above that I think the industry has since collected together near the bottom (quite like ISPs, when you think about it). Oh, did I mention that I am quite literally a combustion engineer? I'm designing (well, actually, trying to avoid designing and trying to make the junior engineer do it) a heavy fuel oil firing system for a cement plant in fricking Iraq, this week. Last week it was natural gas fired this-that. The week before it was LPG fired anode furnaces for a copper smelter (well, the burners for them, not the actual furnaces, which are just big dumb steel). I'm kinda all over fuels.
    • Well my freshly rebuilt RB25DET Neo went bang 1000kms in, completely fried big end bearing in cylinder 1 so bad my engine seized. No knocking or oil pressure issue prior to this happening, all happened within less than a second. Had Nitto oil pump, 8L baffled sump, head drain, oil restrictors, the lot put in to prevent me spinning a bearing like i did to need the rebuild. Mechanic that looked after the works has no idea what caused it. Reckoned it may have been bearing clearance wrong in cylinder 1 we have no idea. Machinist who did the work reckoned it was something on the mechanic. Anyway thats between them, i had no part in it, just paid the money Curiosity question, does the oil system on RB’s go sump > oil pump > filter > around engine? If so, if you had a leak on an oil filter relocation plate, say sump > oil pump > filter > LEAK > around engine would this cause a low oil pressure reading if the sensors was before the filter?   TIA
×
×
  • Create New...