Jump to content
SAU Community

Recommended Posts

I have a few left over parts for sale that i need to sell to fund a Haltech and 1400cc injectors

RB30 A8 turbo block Has been freashly honed and decked and primed and painted House Of Kolour candy apple red over a gold base will be fine with heat and also comes with a freashly ballanced and preped crank. It is also drilled and taped for 12mm ARP head studs and tensioner is also drilled and taped

(87mm) N.O.: 040727 A8

$500

HKS cams that came with a spool imports race prep head package. These cams are rare and hard to find now. The specs are HKS 272 deg 9.35 lift

$800

Rb26 plenum and throttle bodies

$450

RB30/25 flywheel has been freashly machined and lightend by Direct clutches in brisbane

$150

This is a vid of these cams and this block getting dyno befor the motor was striped down and refreashed. Gives a bit of an idea on the note of the cams

Contact Monty on 0439 592 916 or reply on here pics below

post-40332-0-95705600-1389425263_thumb.jpg

post-40332-0-74075400-1389425282_thumb.jpg

post-40332-0-07829200-1389425302_thumb.jpg

post-40332-0-27009200-1389425315_thumb.jpg

post-40332-0-55106700-1389425331_thumb.jpg

post-40332-0-78712300-1389425352_thumb.jpg

post-40332-0-60462700-1389425373_thumb.jpg

post-40332-0-08558000-1389425390_thumb.jpg

post-40332-0-49926200-1389425406_thumb.jpg

post-40332-0-18511200-1389425424_thumb.jpg

post-40332-0-32088800-1389425441_thumb.jpg

post-40332-0-14080300-1389425456_thumb.jpg

post-40332-0-73791400-1389425474_thumb.jpg

post-40332-0-54584800-1389425489_thumb.jpg

post-40332-0-12449600-1389425505_thumb.jpg

post-40332-0-89947600-1389425518_thumb.jpg

post-40332-0-87620800-1389425534_thumb.jpg

post-40332-0-40148500-1389425553_thumb.jpg

post-40332-0-97661900-1389425570_thumb.jpg

post-40332-0-93586000-1389425589_thumb.jpg

post-40332-0-19841800-1389425605_thumb.jpg

post-40332-0-27716100-1389425621_thumb.jpg

post-40332-0-20592300-1389425637_thumb.jpg

post-40332-0-66535100-1389425655_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/437435-fs-rb30-a8-and-rb26-parts-hks-cams/
Share on other sites

Do the cams use a standard 32mm base circle, is the head relieved for lobe clearance, any part numbers, sorry for all questions, just trying to find out if they are what I'm looking for

yeh the head was machined for lobe clearance. only details that i know is what i wrote down and that they are rare. I didnt want to sell them but need to finishish this motor to get the car on the road been 3yrs now and only need ecu and injectors. sorry i cant help you more. They measure 32.5mm over the base and 41 from the base to the tip of lobe

Cheers for the reply, looking for straight drop in, may go 270 poncam. I feel your pain put a 26/30 as well as many other things in my 33 s2 gtst and spent 3 years off the road also

  • 2 weeks later...
  • 2 weeks later...
  • 1 year later...


  • Similar Content

  • Latest Posts

    • The cam I am actually putting in (a few posts up) is actually smaller than my current one. At least duration/overlap wise. All the chop stuff I hear just sounds like an engine running badly, because it is. I then envision driving it around in 1st gear and being massively sad about it bucking to the beat of said chop. There is an idle video of someone with a similar cam floating around the internet, but mine is a custom cam (so is his) so it'll never be the same, plus the fact exhausts are entirely different. What I want to do is put some bullet mufflers/race mufflers in to replace a couple sections straight pipes that currently replace the two extra cats that I don't need. But this is even further down the line!
    • I can tell you now, when the bracket that the little hydraulic ram attaches to snaps, with a subframe, and V8 from an AMG C63 on it, it sounds like someone letting shotgun off right beside you. It leaves your ears ringing, and a huge thankfulness that you never ever put a body part under something heavy that's only supported by a hydraulic lift...
    • Still not a guarantee fix. I used a high quality butyl-mastiq (the black goo that's not really silicone nor polyurethane, same stuff they use from the factory that just spreads out like melty cheese), and I still get lots of water on both sides of the trunk when raining or washing the car. I also suspect the factory spoiler rubber gasket might not be sealing well, so I'm thinking of adding a thin layer of grey silicone around the bolt holes on both sides and see if that's where it also leaks from. The biggest issue is that these cars don't come with a drain hole on each side like other coupes and hatchbacks.
    • I hate it, but maybe he could paint it Monster jam style and call it...godzilla?
×
×
  • Create New...