Correct Measurement For Release Bearing To Clutch

[nemini90]

HI All

im hoping someone can confirm for me the correct distance from release bearing to clutch and if i have measured the correct way.

I have just installed a Nismo twin plate clutch to my r33 gtst skyline. I took the measurement from the block to the clutch fingers and got 77mm.

I then went to the gear box and pushed the release bearing back as far as i could and got the measurement of 85mm. this is a distance of 8mm clearance from bearing to clutch fingers when all bolted back together. Could someone please confirm what is the correct measurement. I think i remember reading it was 10mm but i have serched and could not find that information.

I do have a carrier that will get it to 11mm just want to confirm before i put all back topgether.

Thanks Neal

[nemini90]

Anyone able to help......

[xris]

NPC told me that i need 6mm-8mm throw. my current measurements are 80mm bearing to bell housing and 78mm block to teeth. so thats 2mm travel. i need to reduce my bearing carrier by 6mm.

Here are the lengths

30501-A3800 12mm,

30501-N1601 14mm,

30501-U0200 16mm,

30501-S0200 18mm,

30501-B6000 20mm,

30501-S0160 22mm,

30501-K0404 24mm,

30501-K0510 26mm,

30501-N1600 28mm,

30501-N8400 30mm

And how to measure it (A)