Jump to content
SAU Community

Recommended Posts

Hi all,

Due to a setup change on my R33 GTR, I have for sale my excellent condition set of Genuine Tein Control Master Type Flex Coilovers, complete with the Tein EDFC (Electronic Damping Force Controller)

These coilovers are top shelf quality and manufactured in Japan, not China, and are suitable for BCNR33 and will also fit BNR34

All 4 are in outstanding condition, and have seen very little use overall - My car came with this setup fitted and in as new condition, and has since covered around 3,000 km's only.

Spring rates are 8kg (F) 7kg ® from memory, and provide a great range of adjustment to make them firm yet comfortable for everyday driving, while also being excellent on the track.

The EDFC gives you the ability to quickly and easily adjust the damper settings on the fly, from inside the cabin.

post-46-0-52704500-1390022125_thumb.jpg

post-46-0-84975600-1390022143_thumb.jpg

post-46-0-80248300-1390022153_thumb.jpg

Technical Information from Tein:

  Quote
TEIN has used its years of experience in various motor sports to produce a kit that provides the ultimate balance between comfort and performance. Developed for drivers seeking an aggressive coilover that can be used daily, and provide all the adjustments needed for circuit use. The FLEX damper Kit features the latest technology for all drivers who are seeking performance, and adjustability, while not giving up all ride comfort. We have incorporated separate spring perch height, and shell case length adjustment, which allows the suspension to retain more stroke and allows for more suspension tuning. The FLEX damper kit includes pillow ball upper mounts, which increase steering response; 16 levels of damping force adjustment, and is compatible with the EDFC (Electronic Damping Force Controller) for added convenience and adjustability.

Standard Features:


• Steel Construction
• Twin Tube internal construction
• Ride Height adjustable via threaded body and spring seats
• 16 way adjustable dampers, compression and rebound combined
• Pillow ball upper mounts for increased steering feel
• Upper camber adjustment on front for strut type vehicles
• Larger piston diameter for strut type front and rear (22mm)
• EDFC (Electronic Damping Force Controller) compatible
• Powder coated brackets with Teflon coated shock body for heavy duty rust prevention

Per the Tein USA Official website, the Control Master Type Flex base kit will set you back around $3000USD, and that does not the EDFC, which will add another $400 or so.

I am asking $980.00 firm for the whole kit - Note this is DIRT cheap, so please don't haggle or try low balling.

Pickup available on the North Shore in Sydney, or alternatively you are welcome to organise your own courier to pick up.

First in, best dressed!

Cheers :)

I have had these coilovers in my car for 6 years and feel exactly the same today as they did back then.

Quality product!

Not at this stage sorry mate, I would prefer to sell the EDFC and suspension as a package.

Price drop to $900.00 FIRM!

As above, and per the photos, they are in excellent condition and were only removed due to a complete change in my setup, so there is no need to rebuild.

This is a high end Japanese coil over package that I'm selling at a dirt cheap price purely to move them, it's a damn good suspension setup for minimal money, so my loss will be someone else's gain here.

Cheers!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • You're probably right about that one. Thanks for your suggestions, I hope I don't need a new 3rd brake light. Although wiring issues might arguably be worse. Right now I'm in the midst of a turbo removal because of my oil leak, other problems are going to have to wait for now.
    • Hell, I know that much. So far I just put it off as "part of the deal".
    • I removed the head expecting to find broken and bent valves, but instead found number 1 at TDC and cylinder 2 at the top of its cylinder stroke as well, thought that was weird and proceeded to push cylinder 2 back down until it either bottomed out on its other piston half or the conrod either way we found the issue kind of,  now to remove the engine and see how the block looks, hopefully its just the top off a piston.  
    • A little more work this week.  Fitted astra power steering pump in the boot with a lowe fabrication bracket. Gave the pump a good clean, fitted Anderson plug and high pressure fitting. With the intercooler being flipped under rad support factory headlights weren't going to work. Ordered a set of origin battle lights, they arrived so got them test fitted. Will require some fiddling to fit nice but was an easy quick option for now. And today we pulled out the manual Rb gearbox and test fitted a ZF 8HP50. It will fit with some casting tabs cut off and small tap of the tunnel with a hammer. Pick up the adapter plate Wednesday so hopefully all bolted in Friday and measure for tailshaft which will be a 2 piece. Been doing a lot of ecu, pdm and tcu loom design so when comes to wiring it in a few weeks will all go smoothly.
×
×
  • Create New...