Jump to content
SAU Community

Recommended Posts

hey guys,

i couldnt find anything specific to this so here goes.

i regularly have to travel for 4-8 weeks at a time with work so its not uncommon for my 32 GTR to not be started for said periods.. now ive found over the last 9 months, my car is deteriorating in how rough it is on cold start after a break... early last yeah it wasnt a problem, during startthe engine would shake for the first 3-5 seconds (while i assume it properly lubricated itself) and most recently after 6 weeks from christmas swhen i started it, it didnt just shake it sounded like something clanging within the engine, i was instantly about to cut ignition, however after 2-4 seconds the clanging stopped and she sorted herself out... my car runs perefectly smooth at all other times.

is this a problem (obviously not ideal), and is there anything i can or should do to avoid it, either before i leave or prior to starting? the oil is changed every 4000k or therabouts so is always in good condition, oil pressure is always fine etc etc.

thoughts?

cheers

Dan

Link to comment
https://www.sau.com.au/forums/topic/437780-cold-start-after-4weeks/
Share on other sites

yeah I got this too (the clackety clanging, not the shaking) when I go away n then come back n go to restart the car. so now when i go to restart my car I crank it until it almost fires n then shut it off. I do this 3-5 times which pumps oil around the motor without it coming up to any serious revs and so that when I do let it fire it doesn't make the clackety clunk routine. Having said this it was on my GTST and was most likely the hydraulic lifters needing some oil in them. Nonetheless, It still may fix what your issue is too in some way as the motor would be getting pretty dry after 4-8 weeks. But if it doesn't, maybe look for some more extreme elements of wear in the motor...

Beyond this, it sounds like your car is struggling to get fuel or spark to a cylinder for a bit hence the shaking (sounds like a misfire).

Edited by jjman

Sounds like your fuel may be bad from sitting so long in the tank, and or the plugs are a little fould from spending the majority of their time running on bad fuel or a little rich while warming up.

Id put some fresh fuel in and a new set of plugs first and go from there.

You could also have a case of a sticking gummed up injector from sitting there for so long.....

Edited by GTRPSI

thanks for the responses guys!

so to sum up this is either caused by oil draining from the cylanders, or my plugs have fouled from bad/stagnant fuel?, and so by either removing spark plugs or CAS when first turning it over (untill guage registeres oil pressure) then refitting will prevent this happenning in future? (cant really do anything about fuel as i cant replace the fuel without starting her up and taking her to a servo).

if i wasnt to do this, will it damage the engine? or would the wear be negligible?

The rough running is typical of sticking injectors, regular use of injector cleaner will help.

this is true.

if you are still running the stock OEM R32 GTR injectors then id say you would be very wise to upgrade to some new and or bigger ones + tune.

bad injectors are as quick a way to kill a motor as a bad fuel pump- well almost...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As GTS mentioned, it takes a bit of faffing, some fiddling and a little modifying.  With the strainers, you can buy different styles. Some sit flat on the pump, some angle down.  Here are some photos of mine, ignore the ugly welds lol. 
    • The smart thing is to actually locate the pump at the right point down the hanger, so that the strainer can stay sticking out at a right angle, but near the bottom. This is the perpetual hassle with retrofitting any different pump to the factory hanger. Some just go where you need it to, some need fiddling and faffing, and modifying of stuff.
    • Some updates. After a lot of praying and some inspecting of crank threads, we've found that they were both kinda munted but nothing seemed terminal. The other option was drilling and helicoiling the crank. That is obviously the last option so we decided to at least try to get a OEM GM bolt in to GM Specs. So after honing/linishing the balancer from it's .002" interference fit to a .0018" to .0015" to .0013" it eventually slotted on to the crank. ATI state the interference is nominally 0.0007-0.0009... so it's still snugger than ATI reckon and explains the issues we had to fit the thing to begin with. New GM bolt went in at 37 ft/lb then torqued 140 degrees after which was EXTREMELY   but it tightened up to 140 degrees and it was a lot of force. So all things considered, the balancer is secured to the exact specs that GM want with the OEM Stretch bolt, (that ATI say you can use..) and the balancer itself is seated and snug AF. So WOO. Engine is now back in the car with lots of swearing. Bellhousing bolts done up, driver side manifold is on, AC Compressor and hard lines are back on the car. Next step will be to connect various engine bits/wiring/intake/radiator etc. Then oil and coolant and ... test start it? And of course, looking into this issue... which actually doesn't look so bad - It looks like it can be twisted back into shape with a set of multigrips. Anyone wanna buy my bonnet? Boy it looks good over there and sunk cost sucks.
    • Also this may be a stupid question, but how would you recommend getting the strainer on a downwards angle ? as they tend to obviously clip to the bottom of the pump which usually sits level 🥴
×
×
  • Create New...