Jump to content
SAU Community

Recommended Posts

Let us paint this picture in your head; The East Coasts BEST modified cars from all genres, makes and models, mouth watering food, the warm summer sun, awesome music acts from some of Melbourne’s best local talents and of course, a back drop of Melbourne city. All the things we love in the one place…at the same time? Is it even possible? Of course it is!

1509879_433818723414196_1194650145_n.jpg

Our friends at 100mm are at it again! Who remembers ‘Certified’ 2013? Just in case you have forgotten, click this link NOW!

2014 marks a new year and a new Certified event by 100mm!

Cars x Food x Music? What more can you ask for?

Date: 22nd of February 2014
Time: 11am – 6pm
Location: New Quay Promenade as well as the Harbour Town Piazza
Registration: Please visit http://www.100mm.com.au/
Facebook Event link: https://www.facebook.com/events/1389268581324711/

We’d say, “we hope to see you there” but for some strange reason, we know you will ALL be there. So see you all at this year’s ‘Certified’ event!

Edited by private
Link to comment
https://www.sau.com.au/forums/topic/437833-vic-certified-2-2014-by-100mm/
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Hey lads, reviving an old thread.  As an update, since the last time replied to this thread, ive done mostly suspension. Havent touched the motor except for maintenance. Though upon changing spark plugs, found out i had splitfires pre-installed! Updates: - Got me some stock airbox top cover and snorkel to fit onto the original intake. Should be free of defects - Bought a set of R34 GT-T brakes (not installed yet, going to rebuild + respray in champion blue + white 'Nissan' text) - Bought the last set of bilsteins from @Sydneykid and had them installed. Has been making some sounds on the rear but hopefully should be sorted out after this New Year break. - Regreased front caster rod bushings (poly bushes..) - Rear upper camber arms - Whiteline sway bars (BNF27Z 22mm + BNR11XXZ 24mm).  The rear sway bars are a bit short (ive read 50mm else where) but was still able to get them in.  Anyhows, I reckon suspension is sorted now. Maybe replace bushes (do have a set of front upper control arms from SK not installed yet) but should be okay for now. From now, I'm wanting to start working on the motor, drivetrain etc etc. Still debating on the order to go on and what to buy etc but: - ECU ( Haltech or Link ( Link states that it dont support A/T or AWD functions... Can anyone attest to this? ) - Highflow turbo ( ATR43ss2 ) - Intercooler ( Not decided yet, but cant find many good afoordable ones. Toshi says to opt for crossflow Japanese. Bit difficult this one, unless I get a returnflow Blitz from JJ? ) - Injectors ( Any recommendations ? I do have a nismo FPR ( Thanks SK ) ) - Seats - Tune by either Toshi or DVS To be fair, I did consider just keeping the stock turbo and nistuning it. Sat in a mates stock N, that had something like 200kw, and I reckon that felt more than enough. Maybe I should just go this route ahhaha. Too many choices.... Planning a trip down south, so wanting to just clean things up and make sure it gets to and from in one piece. Anything else specifically I should do before ? Cheers lads  
    • Must be for the car’s lucky charm 🤷🏽‍♂️ She runs fine, but it just seems to take about 1L less. Maybe I’ll have the oil sump dropped at some point to check if there is anything 
    • Hmmm interesting. Mine is the exact same and clearly the right one.  The mystery of the engine oil being full after 3.5-4L continues 
    • Yes I as well would like to find out where I could get some of the seat material with the red or blue small squares in it
×
×
  • Create New...