Mounting A Fixed Back

[Adz2332]

Hey all

Just a bit confused.

I have just bought a brand new sparco pro2000 drivers seat.

Now im a little confused.

Do I need the silver side mounts and then mount to a super low bride rail? As I need it to move just in case others drive it.

Is there no way to bolt directly to the bride rail?

As id like to keep the sest as low as possible.

Confused

[ichi-go]

Bride sells bride rails which are side mount?

[75coupe]

I'm using a bride mo rail with the silver alloy brackets, had a driver. 6ft4 with helmet, sparco 2000 as well

[Adz2332]

Cheers guys,

how do you tell what an MO is in a used one? ie pic below is a bottom mount bride for a r33 but unsure if itll work?

[75coupe]

that one should work ok with the brackets attached to it, thats a n103sl, I think sl stands for superlow, I could be wrong, very similar to mo...

I need to find a rail for a passenger sparco pro 2000 so will use pretty much the same setup as the driver side but use any bride rail I can make work

[Adz2332]

Do you have any pics on how you have mountef yours.NNow I have the seat and rail im still confusec!!!!

[75coupe]

I can take pics if you need but its as simple as bolting brackets to seatrail, bolt seatrail to floor then bolt seat in, positioning the seat is the hardest part so the shoulder wings dont hit door

[Adz2332]

The seat rail doesnt seem straight as such has a little curve in it. so i can see how a straight side mount will mount onto it

[75coupe]

pics of my sparco fitted with bride rail and alloy brackets for the side mount factor...

and an underneath shot

[Adz2332]

Ohh ok!!

Ill have to find some alloy brackets over the weekend and give it a crack.

Thanks