Jump to content
SAU Community

Recommended Posts

Hi all , just wanted to share my detailing experience and some photos with you guys. My GT-R had foggy lights , swirl marks everywhere and I'd wanted to give it a good clean since I've never detailed it properly since i bought it .

Took it to a place called Affinesse (VIC) , Jerald the owner talked me through the processes involved and after seeing some of his previous work i quickly booked the car in for a well deserved luxurious bath.

Here are some of the pictures , most of them are of the actual detail process and then a little photo shoot that comes with the premium 3 stage detail.

Photos are taken by Affinesse and the captions are written by Jerald .

gzLsS3y.jpg
EfCBQQu.jpg
qJWJ9Yt.jpg
Wheel Woolies x Sonax Full Effect Wheel Cleaner
uXvK8mL.jpg
A8KFZE7.jpg
sPAkJIK.jpg
5jw5GI0.jpg
Optimum Car Wash x CT18
wy8cwoy.jpg
Prepping the 50/50
ZSkuAYl.jpg
HD Cut x BnS Microfibre Cutting | M205 x LC Black
eilOKab.jpg
Took out the side indicators to clean behind
fFtKM9x.jpg
Clear runs on the bumper. 1 of 3.
bZ9zwi7.jpg
Wet sanded with 1200, 2000, 4000 and then polished
j69BXRa.jpg
Before correction
0xui7rh.jpg
cBwuMEo.jpg
EZjC3a1.jpg
X6I0drf.jpg
J261oKz.jpg
K9AodY7.jpg
The BBS logo was a bit cloudy
J8FHJ8T.jpg
Polished with HD Uno x LC Black
AePygfD.jpg
The rear lights had been heavily oxidised
X6jxAGd.jpg
So they needed a bit of a wetsand. Exact same process as headlight restoration.
Eio51PO.jpg
50/5- wait...70/30?
hfItS3C.jpg
Such a little detail really adds back visual value to the car
6aNMYt7.jpg
Applying Sonax Premium Class Carnauba via Dodo Juice Finger Mitt
Mkf5HFV.jpg
Optimum Edgless - Always the MF of choice for me.
oIZ9hrR.jpg
I was stunned by the gloss and depth of the Sonax Carnauba (especially on the fender). And that was just after one coat.
jfCeZWC.jpg
Link to comment
https://www.sau.com.au/forums/topic/438087-extreme-detail-99-bnr34-gt-r-v-spec/
Share on other sites

And so begins the night photoshoot. I was feeling like doing something different this time. Different colour tones and more vintage effects.
JwA8pYx.jpg
2hCR9UX.jpg
2AG9mMA.jpg
Of course, as a fellow GT-R enthusiast, a tribute to Paul Walker - May he rest in peace.
RswMitq.jpg
At 5 in the morning, I became engrossed in the taillights.
juQId6R.jpg
00dPJQh.jpg
After the car meet, we recooped for a daytime shoot
BKyc2CZ.jpg
DZJbrhD.jpg
AoIX6qJ.jpg
I was surprised I was able to capture the metallic fleck on a 17-55mm Lens rather than my usual 100mm Macro. The wax just kept on impressing.
rKGKgQQ.jpg
X1P22r1.jpg
Wheels coated with Finish Kare FK1000P, Tyres with HD Tyre Gel
dFHZam7.jpg
Normally I'm a big fan of Optimum Opti-Bond due to it being water-based and low-gloss, however the HD Tyre Gel is simply amazing if you want high gloss. After very high speeds, we found absolutely zero sling on the tyres.

I was amazed at the results after seeing it in person .

Thanks everyone for reading
Edited by xtermin8or
  • Like 3
  • 3 weeks later...

Epic result, I think I need to get me a tub of that Sonax wax. The wheel cleaner is excellent too, bought some a while ago, doesn't stink as bad as some other similar products

Wetsanding is basically sanding the clear coat with really fine sandpaper and water for lubrication. Works great for taking off blemishes or flattening "orange peel" that some cars either have from factory of after paint repairs. But, wouldn't recommend anyone trying it (if you haven't done it before) without some practice on scrap panels first, especially around sharp creases and edges, doesn't take much to go thru the clear if not very careful

Edited by junkie

Epic result, I think I need to get me a tub of that Sonax wax. The wheel cleaner is excellent too, bought some a while ago, doesn't stink as bad as some other similar products

Wetsanding is basically sanding the clear coat with really fine sandpaper and water for lubrication. Works great for taking off blemishes or flattening "orange peel" that some cars either have from factory of after paint repairs. But, wouldn't recommend anyone trying it (if you haven't done it before) without some practice on scrap panels first, especially around sharp creases and edges, doesn't take much to go thru the clear if not very careful

Cheers mate

So its normal sand paper just really fine grit? Does it produce a better result than using the clay bar?

fark im a noob i did two similar replies to this topic

Cheers mate

So its normal sand paper just really fine grit? Does it produce a better result than using the clay bar?

ill try explain it... claying is more of a maintenance thing, while wetsanding is defect rectification.

clay will only remove the crap thats stuck to your clear coat, stuff like brake dust, tree sap, etc but it wont fix any issues with the paint itself. its also pretty genetle on the paint, if done properly

wetsanding on the other hand, its more of an extreme method of fixing paint defects like deep scratches, clear runs and orange peel. its normally used in place of machine polishing for a smaller area to save time and effort. and since it takes off a thin layer of clear everytime, its not something you want to do often. plus, machine polishing is needed afterwards as youre left with a matte surface. if you want to try it yourself, id suggest buy a scrap panel from a wrecker, then get some 1500/2000/2500/3000 grit paper and go nuts.

fark im a noob i did two similar replies to this topic

ill try explain it... claying is more of a maintenance thing, while wetsanding is defect rectification.

clay will only remove the crap thats stuck to your clear coat, stuff like brake dust, tree sap, etc but it wont fix any issues with the paint itself. its also pretty genetle on the paint, if done properly

wetsanding on the other hand, its more of an extreme method of fixing paint defects like deep scratches, clear runs and orange peel. its normally used in place of machine polishing for a smaller area to save time and effort. and since it takes off a thin layer of clear everytime, its not something you want to do often. plus, machine polishing is needed afterwards as youre left with a matte surface. if you want to try it yourself, id suggest buy a scrap panel from a wrecker, then get some 1500/2000/2500/3000 grit paper and go nuts.

Cheer man, makes sense

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, the latter. No diff should have a centre replaced without checking clearances because its unlikely to be the same as whatever came out. Not that that stops most people just checking a new centre in
    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
×
×
  • Create New...