Going Single Gt35 On Rb26, Were To Install Map Sensor?

[Goved5]

Hi, am deciding to go single gt35 bb turbo on RB26DETT, what options, do i have with regards to tuning, do i keep twin mafs and use a piggy back computer, or do i go stand alone ecu, but were should the map sensor be installed taking note of the individual throttles, any pics of were map sensor should be installed will be greatfull.

[GTSBoy]

Map sensor needs to be connected to each and every inlet manifold runner downstream of the throttles. Luckily, RB26 already has just such a location.

[SiR_RB]

With the power fc d jetro it stated to tap and connect the map sensors after the throttle bodies on cylinder 2 and 5 inlet runner

[33GTRV]

Best way to install the map is ditch the 35r and buy a 6466, then get a vac point from the balance tube like most.

Good luck

[Goved5]

why you say to go with a 6466 turbo and were is the balance tube?

[GTSBoy]

Under the inlet manifold, where it's supposed to be. Have you not looked at a diagram of the RB26 inlet system?