Jump to content
SAU Community

Recommended Posts

I used to have a hicas lock bar but it snaped off while driving :-{

So I now have the standard Hicas setup which I have never had before. To be honest it kinda freaks me out a little. Sometimes it makes the arse of the car feel like jelly... I am slowly getting used to it though.

Does anybody out there experience similar things with hicas?

Link to comment
https://www.sau.com.au/forums/topic/43823-does-hicas-freak-you-out/
Share on other sites

The thread on the bar gave way so the rear right steering arm fell out. The rear right wheel started to steer my car all over the road. Lucky it was only at 80 kph. The day before this happened is was doing 200kph racing my mate :-{ That would have killed me and him

The HICAS certainly does give you that "I have no idea what's going on back there feeling" especially as speed increases. I had mine disconnected electronically, only because i didn't wan't the car to be straining against a "lock" mechanism. Centainly makes a difference with it turned off - and wouldn't even try taking it onto a track with it turned on.

I found HICAS to feel like the arse end was rolling on high profile tyres at first.Discovered that if you don't turn the steering wheel as much into corners (which is hard to get used to) then the car feels beautifuly planted on the road.I have the 1st HICAS though,which doesn't use a rear rack,so this may differ in feel to R32>

drifting isn't about skidding out of a corner, its about getting the car sideways into the corner and coming out of a corner straight... which is what HICAS will do if controlled properly, of course, its easier without HICAS (allowing you to oppy lock), but not impossible.

all HICAS does is make your steering more responsive at high speed, you just have to learn not to turn the wheel like you got no power steering.

What's dangerous is opposite locking with hicas (fun fun fun) as it has some wierd effects :P

Hicas only works at higher speeds, doesn't it? So it's not as if your girlfriend would notice the rear wheels steering, even so slightly, when I was parking the car or something? (excuse my lacking in this dept.)

Hicas kicks in properly at 80kmh and it moves the rear wheels .7 of a degree.

Hardly enough to throw you off track during "Normal Driving"

On the track yes it's tendancy to sharpen the angle of the car does make it tricky to judge the corner.... but after a few corners you get used to it. I have driven cars with and without HICAS on the track the car without HICAS and a rear brace is much more ridgid and "Feels" planted in the corner. Mine with HICAS the steering wheel tends to want to fight back but cornering is about the same in my opinion

guys my hicas doesnt work, the only time i see the hicas light is when car starts for 2 seconds then it turns off. i think its disconnect but where would it be disconnected from, and wat does the lock bar look like, i wanna find out? also when hicas kicks in does the light turn on??

also depends what model of cvar you have...

ECR33 = Hicas Equipped

ER33 = non Hicas model

HCR32 = Hicas Model

HR32 = non Hical Model

as you may have guess the C stands for HICAS

H = 2.0L Engine

E = 2.5L Engine

well it is a ecr33 cos it has it in the engine bay, and i do have a hicas system looking thing in the boot, just dont feel it kick in or the ass become easier to turn, wat should i look at, i want to experiance hicas like u guys :D

I've managed to get used to it. Theres a big corner on the way home from work which I use to get the feel of it every day. My car has front and rear strut braces and they changed the feel of the hicas a bit. It gets small precise twitches from the rear through a corner, feels kinda weird as you all know. A week after i bought my car, i tried a drift in the rain and lost it and i couldnt gain control of it, very scary stuff, i had to hit the brakes and cross my fingers id miss the guard rail. i didnt know what went wrong (later i learned about hicas). anyway, since then ive learnt that if your crossed up, point the steering wheel (dont yank on it) where you wanna go, slightly understeering and keeing power on and it will go in that direction 99% of the time. A good way to learn is to get on a skid pan or shopping centre car park and go mad for a while.

-rb25

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Got the gearbox in and the front drive shafts.
    • Hi There I went through a rabbit hole of reading about Xenon headlights and the ADR regulations for having them installed. As people have been defected by running factory xenon I was researching in ways to make them compliant. Everyone always say needs to be self leveling and have washer installed, which I don't necessarily agree with. For this argument I'm using R34 as reference as I'm more aware on the construction of the headlight compared to the R33 Xenon, which may still be the exact same case.   For the self leveling clause taken from ADR 13 - Installation of Lighting and Light Signalling Devices on other than L-Group Vehicles As you can see the bold text "these manually adjustable devices from driver seats" are fine to use. As Series 1 Xenon model headlights do have a 4 level adjuster on the right near the ignition (however not series 2) then these model are consider compliant in that argument.   For the Self Cleaning aspect of this argument clause taken from ADR 13 - Installation of Lighting and Light Signalling Devices on other than L-Group Vehicles Now i can understand the argument that Xenon will need a washer as they are over 2000 lumens, but I clicked on the 12 at the end of that sentence and it takes me to the end notes which states R34 for headlight lenses are plastic, not sure if PL is mark as I don't currently have my skyline to confirm that marking is there. But could you not technically get a lenses with the PL marking on it and then get away with the argument that you need a washer. I went through a quick read of the adr and might have missed something else that may cause them to be non-complaint.    But wouldn't these technically be complaint headlights   Would love to hear other people input on this and shed some light   Edit In regard to the the washer portion I might be mistaken ADR 45 (which I believe is Regulation NO.45) states 12 cd (candela) I dont understand that portion in regarding to calculating the candela if anyone can shed some light. Otherwise I guess throw in a washer for the headlight and you definitely comply.
    • Took it to all Japan day, flogged the hell out of it and took it all, am a very very happy man  don’t know how that ended up in Greg’s thread before
    • Hey Nismo, any chance in the world you still have these seats?
    • I'd say closer to OG GTX3582R, just smaller trim - so 59mm inducer/82mm exducer as opposed to 62/82 for the first gen GTX3582R. Yeah EFRs were boss, the EFR8474 is still an absolute beast and it perplexes me that people still go to things like Turbosmart/Garrett etc when the results people are getting with those are pretty unremarkable compared to what you could get with a turbo available well before those options came out.  DriftSquid (I think) "upgraded" from an EFR9174 to a Turbosmart turbo and promised a comparison video - and kinda shuffled awkwardly and did a bit of diversion from the fact that they didn't get any improvement going to the currently massively hyped brand of turbo from a turbo that was a bit of a frankenstein that had been well superceded in it's own range before the Turbosmart unit he put on there even came out. I suspect the EFR would outperform most Xonas for what a lot of less-insane RB owners would go for, in the 400-600kw range but the Xonas are looking hard to beat up to maybe in the mid 700kw range at this stage- basically where EFRs don't really reach, and before the Precision turbos take over.  What the Xonas do well in the "EFR range" is be easier to package etc, and work very well if a divided housing doesn't suit your application.  
×
×
  • Create New...