Jump to content
SAU Community

Recommended Posts

i have a r34 gtt auto with 117k with the following list of mods

spiltfire coil packs ( have only done about 15000K)

trust turbo back exhaust

greddy ebc set to 11 psi

k & N panel filter

(stock turbo)

so basicly not many mods as you can see.

The problem is that when I start the cold start the car it will shut of straight away, I wait about 10 seconds start it again it goes up to aout 1000 rpm then down to about 400 rpm then up to 600 rpm then bounces between the 2 for a little while. I can drive the car but it seems down on power. It wanst to stall when I come to a stop at a coner but still keeps running.

I have replaced the spark plugs, O2 sensor, Air temp sensor, Fuel fiter & air flow meter.

I have also cleaned the throttle body & aac.

I am using ecu teck to check for error codes and I am not getting any error codes just the 55 code ( all clear)

need any ideas please

Edited by newboost
Link to comment
https://www.sau.com.au/forums/topic/438336-need-help/
Share on other sites

Just a suggestion as I've had almost identical issue in the past.

Check your engine temp sensor connection, (the 2 pin square plug not the Single wire plug)

If it's not connected properly it won't give cold start enrichment, it also won't throw a code.

Mine had a broken clip and was on but wasn't making contact.

Link to comment
https://www.sau.com.au/forums/topic/438336-need-help/#findComment-7184772
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...