Jump to content
SAU Community

Recommended Posts

Very nice. Do you have much problem with rust over there, with all the snow?

Thanks :) Snow isnt the problem, but salt used to keep ice out of the road is.. But here in northern Finland they doesnt use it so much :)

^^^ Looks awesome!

I just can't get over seeing an R34 against the quintessential Finnish backdrop ... it's a loooong way from Yokohama :)

Thanks :) Yeah, its isnt the usual backdrop :D

Thanks :) Snow isnt the problem, but salt used to keep ice out of the road is.. But here in northern Finland they doesnt use it so much :)

Yeh that's what I was getting at; I had a look under my Opa's car in Germany once. 1997 Audi S4, had so much rust underneath it made me nervous getting in it. Still, beats sliding off the road because they didn't salt it!

Yeh that's what I was getting at; I had a look under my Opa's car in Germany once. 1997 Audi S4, had so much rust underneath it made me nervous getting in it. Still, beats sliding off the road because they didn't salt it!

Haha :D Luckily i dont drive my r34 at winter. I dont care if my bmw get some rust :D

Looks good.

Front bar is a bit too solid for me.

The division between lip and bar actually helps.

Also with the side all closed up :P

Thanks!

You mean holes in stock gtr lip? I think theres no big benefit of those if you dont have air ducts installed :)

Edited by Guula

Hi Markus,

Love your work. I like the body kit work you have done.

Also appreciated the fact you seem to be majority of the work yourself.

The R34 looks nice smooth. Bet you she loves the cold too ;)

I miss Finland very much and have even been contemplating relocating there, and if do I would take my R32 GTR with me.

Will keep an eye out on this thread.

Top stuff

Hi Markus,

Love your work. I like the body kit work you have done.

Also appreciated the fact you seem to be majority of the work yourself.

The R34 looks nice smooth. Bet you she loves the cold too ;)

I miss Finland very much and have even been contemplating relocating there, and if do I would take my R32 GTR with me.

Will keep an eye out on this thread.

Top stuff

Thanks mate! :)

recon you should shave the door handles !

My friend said the same :D But im not going to go there now, maybe later if repaint the car etc..

I just drove little 1300km road trip and next thing is raise the boost 0.7 -> 1.2-1.3 and tune it :) Turbo and new screamer are awesome!

  • 4 weeks later...

Like to see a DIY on making that front lip?

I have to check how much i have photos of making it :)

How did you go, any dyno results yet?

Hope to get it tuned next week.

My clutch release bearing started to make some noise so had to repair it week ago.

Also replaced all bushes from rear. Much more solid rear now :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • In a few years from now, you'll regret that. It'll eat away at you, knowing the truth of the ugly hiding beneath the beautiful exterior... 😛
    • I don't think the G2 profile is particularly dangerous for the engine per se, more just are you actually ok with the turbo lag trade-offs? If the answer is yes then go for it. I personally don't think I'd be ok with it because I spend so much time at lower RPMs and I really enjoy the feeling of being able to stay in 5th gear on the highway and just roll into the throttle to get boost. Or staying in 3rd gear on "gentle canyon cruises" without feeling the turbo lag too badly. The 525 pump should be able to run flat out on factory lines but I would bet the pressure drop from pump to regulator is quite impressive. I don't know how much it would be exactly but I've seen figures like 30 psi thrown around.
    • It's interesting seeing everyone talk about what level of risk they are happy to tolerate.  Building a GTR always has a level of risk, you could be that lucky guy that drops 20k on the engine build alone and still has the thing go pop on the dyno. Life is fun like that.  The way I see it, the thing is a toy to be enjoyed. I'd be happy to turn up the power on stock motor and limit the risk with sensible tuning and engine protection. If it still goes pop, it is what it is. The car isn't a daily driver so it can happily sit while a plan is made to sort it out.  Given this thing will be a street car only, I really feel it's worth the (relatively small if managed well) risk to turn the power up to around 350KW on e85.  I don't think anyone getting into the skyline game now is doing it out of logic. Surely it is a purely emotional decision so I'm not sure how important it is to think about the engine build logically. The heart wants what it wants.  @joshuaho96 little note for Josh, I run my 525 pump flat out all the time and through the factory lines without any issues. (excluding the melting connectors, that's sorted now. we'll pretend it never happened lol)
    • But the Nexus S3 is very expensive and won't be as purpose-built for the application as a separate electronic boost controller :^) More seriously my pet issue here would be that the Walbro 525 running at 100% duty cycle is going to require more FPR than the stock setup can handle. I'm also pretty sure from what I've seen elsewhere you might want to slow down the pump regardless unless you're going to come up with some way of upsizing the fuel lines coming from the fuel tank. Factory 8mm fuel line doesn't actually flow very much if you want to keep pressure drop down between the fuel pump outlet and FPR. If you really want to "keep it simple" I would run only as much pump as you need and source a fuel pump controller to slow down the pump in the vain hope of being able to run stock-style FPRs which are pretty dinky. Or just use the HICAS lines and it should be mostly fine. OP should also really think hard about what profile they'd want out of the turbo. My pet choice here would be the G1 profile rather than anything higher power but YMMV. I already think ~stock turbo lag is pretty bad so I don't want to make it worse. In "gentle canyon cruising" I found that I spent a lot of time around 4-4.5k RPM. I also recommend DIYing labor if you're detail-oriented enough. Costs are high for labor + if you do it yourself you can be your own quality control.
    • GTSBoy is again on the money. My actual advice? Sell the car. (really). For what it's worth as is, you can sidegrade into something much better. If you care about function then this is the actual move. If you want a Skyline to perform, set aside about $100K to do it. This is NOT a typo. You will see right away these are two very different mindsets. Realistically we're talking full restomod for any Skyline still kicking around. Have an honest think about which one you are.. and what you want to do, and how much you want to invest in this (with no return).
×
×
  • Create New...