R33 GTS-T Group Buy Exhaust package still available

[Blitz]

Gday all,

For anyone still interested who hasnt yet made use of the special group buy on Hi tech exhaust systems for the R33 GTST, the offer is still available until stock runs out.

Pricing again is $700 fitted for front pipe,dump pipe and hi flow cat converter in stainless 3 inch

or

$1100 for 3 inch cat back with choice of rear muffler in stainless WITH resonator to keep the noise down.

Many of you have already seen the system as installed on my car.

With the Full Hi Tech system fitted, FMIC, Pod and 10psi boost the car was dynoed at 160kw at the treads.

Feel free to email or pm me for any other info.

[Guest INASNT]

have u got pics of the dump pipe u got made up?

and the 160kw@wheels was that with no s-afc, re done edu?

[turbomad]

How much just for the dump? Has it got seperate wastegate section?

[Blitz]

INASNT: the 160rwkw was made with standard ecu, fmic and full Hi Tech exhaust and pod running 10psi with dyno sheets

I also dont have pics, and INASNT i know you have no intention of taking up this offer so there is no reason for you to post on this thread.

Let it be clear that this thread is for the information of those still interested in getting an exhaust done. If you want to know specifics msg me.

Anyone wanting pricing on individual components should call (02) 9569 5888 ans ask for Pete as "how much" question has been worn out on previous threads.

Hi Tech is happy to answer any phone enquiry

Cheers

Nick

[Guest INASNT]

Originally posted by BY BY

INASNT: the 160rwkw was made with standard ecu, fmic and full Hi Tech exhaust and pod running 10psi with dyno sheets

I also dont have pics, and INASNT i know you have no intention of taking up this offer so there is no reason for you to post on this thread.

Let it be clear that this thread is for the information of those still interested in getting an exhaust done. If you want to know specifics msg me.

Anyone wanting pricing on individual components should call (02) 9569 5888 ans ask for Pete as "how much" question has been worn out on previous threads.

Hi Tech is happy to answer any phone enquiry

Cheers  

Nick

mate i already got the dump front etc on my car!

your 160kw with stock ecu seems a bit high 2 unless your ecu has had a remap and not running a/f ratios of 10.0 but 12.1.

lot of dynos read unrealistic number, example being guy with exhaust, fmic, 12psi with unichip, on unichip dyno read 190kw@wheels but when done on race paces dyno on a skyline dyno day only pulled 160kw@wheels!

[Grim]

Originally posted by BY BY

INASNT i know you have no intention of taking up this offer so there is no reason for you to post on this thread.

Look I dont want to start anything but I'd just like to point out that this kind of attitude is completely unnecessary BY BY.

Your original post mentioned performance figures and INASNT responded to those appropriately.

Just remember, this is everyones forum and anyone can reply to any thread they want so long as their post is not offensive.

Oh and inasnt, the power figure BY BY mentioned is easily achievable with the mods listed. It sounds spot on.

Greetz.

[Guest INASNT]

Originally posted by Grim

Look I dont want to start anything but I'd just like to point out that this kind of attitude is completely unnecessary BY BY.

Your original post mentioned performance figures and INASNT responded to those appropriately.  

Just remember, this is everyones forum and anyone can reply to any thread they want so long as their post is not offensive.

Oh and inasnt, the power figure BY BY mentioned is easily achievable with the mods listed. It sounds spot on.

Greetz.

160kw@wheels running stock a/f ratios?? hmmmmmmmmmmmmmmmm

[turbomad]

I made 168rwkw @11psi, same mods(no dump or hi flow cat though), stock AF/Ratio. How much did your car make INASNT?

[R33]

I think it might be an idea to stick to the thread rather than turning this into a "have many kw have YOU got" discussion.

My 2 cents

[Guest INASNT]

Originally posted by turbomad

I made 168rwkw @11psi, same mods(no dump or hi flow cat though), stock AF/Ratio. How much did your car make INASNT?

i got 155kw@wheels at 10psi, got a big mid range improve and lot nicer power curve rather than overallstock cooler is killing top end power!

[Shell]

Originally posted by R33

I think it might be an idea to stick to the thread rather than turning this into a "have many kw have YOU got" discussion.

My 2 cents

:werd:

[Blitz]

Bump!

Come on people...... its interesting that when I first went about organising all this, so many of you put your hand up saying you were definately in and then changed your tune AFTER i put the time into getting it all organised.

Pretty poor form indeed guys :uh-huh:

[slayer]

By BY - I am DEFINTELY going to purchase the Hitech system.. I used their system on my MY99 WRX and it rocked.

I emailed the guys last week but no response - I need to know how much just tou source the exhaust system, as I am in Perth and will have to get it fitted here.

Well done with the bulk buy dude, they are great exhaust systems!!

Conrad

[Blitz]

Conrad, thanks for the great feedback, from experience Hi Techs pretty slow dealing with emails, they are just to busy, if you give them a call they can arrange the parts you are after immediately and shippings no problem at all.

(02) 9569 5888 and Pete is the man to talk to. You will need to say that you spoke to me on the forums.

Let me know how you go

Cheers!

Nick:)

[slayer]

I spoke to them prior to your reply, they want to charge me $1800 PLUS fitting... they say they have used up all the units they made for the bulk buy.

I personally think they just didnt want to sell it to me for the cheaper price - not too happy about that really...

Do you have any sway with them? If so, perhaps you can ask what price they would do it for NOT including fitment.

I need to keep the costs down, as I will get the dump pipe HPC coated (made a huge difference in turbo spoolup on the WRX) which isnt cheap, and freight to Perth plus fitting.

[Guest MRE]

Pricing again is $700 fitted for front pipe,dump pipe and hi flow cat converter in stainless 3 inch

How much in mild steel?

[Blitz]

MRE: Sorry this offer is not for Mild steel, for the price why would you want mild steel?

Slayer: BIG thanks for telling this, was it pete you spoke to? Im glad i found out, I will get it for you for $1800 - pm me

Cheers

Nick

[Blitz]

Slayer: Just spoke to Pete, looks like a bit of mis-coommunication.

They have NOT sold out of the group buy parts, they have just used alot of the pre made systems they had ready, more on the way. He said he can have one ready for you whenever you want it, and cost for you is $1800 plus he estimates $100 for freight.

He apologies for the confusion

Nick

[slayer]

Hmm.. you guys are getting them for $1800 FITTED in NSW. I am in Perth, so fitting by Hitech is not an option.

I have to pay $1800 non-fitted plus freight (obviously ) and then pay another few hundred for fitting here in Perth WA.

Thats pretty crap

Thanks for trying dude, I think they need to focus on consistency in their pricing.

I appreciate they can do the fitting inhouse very cheaply to cover costs, but I should still be able to get some discount for buying the system WITHOUT fitting as I have to pay their distributers here in Perth (Perth Exhausts) to fit the system locally.

Thanks

Conrad

[Blitz]

Slayer, fitting was being done for free actually therefore naturally if you want someone else to fit it they will want to charge you.so please dont complain about getting a raw deal and inconsistant pricing.