Jump to content
SAU Community

Recommended Posts

Hi All,

I have a variety of Sard and Turbosmart branded blue silicone vacuum hoses for sale.

Good quality silicone hosing that are thick walled, and don't collaspe like your cheap eBay sh!t.

Sard hosing has the brand marking SARD etched into the hosing. The Turbosmart doesn't have brand marking at all.

There are good lengths and some are off cuts.

I measured them all up, and approx measurements as follows:

4mm Sard

1x 1.5m

1x 0.9m

6mm Sard

1x 1.0m

1x 0.5m

1x 0.6m

6mm Turbosmart

1x 5.6m

There are a few more extra off cuts around 0.5m to 0.7m in length, but they have been used so I haven't included it above. But they also be included in the pack.

This whole pack I'm after $70 ono picked up in Burwood East VIC or posted via Exp Post anywhere in Aus.

Given that a pack of 6mm x 3.0m Turbosmart go for about $40-50 delivered, I think that the variety pack I have is more than reasonable.

Preferred contact via sms on zero four two one 1 2 1 eight one eight.

Cheers,

Andy

post-25413-0-29581900-1392190040_thumb.jpg

Edited by AnDyStYLe
  • 2 months later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I don't run the spring but it means you need to set your own belt tension.  I put tensioners on both sides too.
    • Hi soviet_merlin, We appreciate your concern regarding this possibly being some sort of PR/Political hype, I assure you that is not the case, I wish we could claim something like that, but in this case, we merely reached out for comment on the basis of the outrage we too felt, as those heavily in the automotive industry. Ps. the original source in the social media post is CarExpert not CarExplore.    Best, CE.
    • Made a bit of a discovery, but while I was cruising, I randomly decided to test to see if it worked and it showed up on my IC7. The entire time I tested it before, I never thought to turn the ignition on. I only tested it with head lights turned on but with the ignition off. Huge oversight on my end. I’m a dummy. I know. 
    • G'day all, I have drilled and tapped the hole for the relocation of the timing belt tensioner. That was straight forward. I'm unsure if I need to also put another hole for the smaller stud that the spring behind the tensioner catches on (this is how it seems to work in its original spot). Or do you not use the spring behind it and just torque it down? Thanks in advance, I did a search but couldn't find anything related and it doesn't mention it in the rb30det sau guide.
    • Hi All,  just thought I would provide an update as I know smooth (Matt) was on this forum from 2003.    my brother Matthew passed away end of may 2024 at the age of 41 from liver failure. I am not sure how many of his original team krazy friends are still on here or active but thought it reasonable to let the forum know.    if you have any photos or pictures it would be great if you could share them.    it took me a while to work out he was active on here.    thanks so much 
×
×
  • Create New...