Jump to content
SAU Community

Recommended Posts

Hey all,

This is kinda a last resort sort of thing.

Background info on the car: C34 S2 Stagea, RWD Auto, Front mount, Pod, Nistune, 550cc Injectors, Walbro 255L, Kinugawa upgraded standard turbo.

My stagea has had startup issues for sometime now, originally it was the cold start which i had the tuner sort out (would take 2,3,4 goes at cranking to get it to start). Now, im having issues with the warm/hot start. Sometimes it kicks over after a second or 2, other times it will take a few goes and by then the battery runs out of juice and needs the aid of a jump start to crank over. Thinking about it as i have over the last few months, i assumed it was a battery/voltage issue as when the car wont crank and the battery depletes, if i use the jump starter, it kicks over first go. I had the mechanic check the battery and he seems to think its ok. Could it be a case of this? something sucking the juice during startup? How would i compare if i measure voltage at startup with a multimeter to make a comparison?

Or could it be something to do with the tune again?

Any help would be greatly appreciated

Josh

Link to comment
https://www.sau.com.au/forums/topic/439151-stagea-startup-dramas/
Share on other sites

Battery sounds like it is stuffed but I have had some minor hot start issues with the Stagea for years.

Presumably it is the AAC but it seems to be clean and I cbf trying any harder to really sort it out since it always starts even if it takes a longer crank.

A battery shop should be able to test your alternator output and if that is ok get a new battery. Actually ideally they can test your starter draw as well and if that is excessive your starter motor is on the way out.

Often battery tests only show if your cells are dead (voltage drop) you need to check cca cold cranking Amps of the battery with a digital test .

If comes up good like the wolverine says look at ya acc ,

Might add, starter has only been rebuilt less than 3 months ago, im assuming it met an early death because it was cranking heaps.

So points to check:

Battery CCA

Alternator - Output

ACC Valve

The missus is on my case as its her daily, and more often than not its her that gets stuck. When its warm/hot, you can litterly crank it for only about 7-8 secs collectively before the battery flattens

Just swap the battery, if you jump it and it fires, it's pretty obvious the battery capacity is ruined. (happens regularly if you let them go dead flat, even once.)

Why are you cranking for 7 seconds though? Perhaps the voltage is so low the coils won't fire properly?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just don't use ChatGPT or any other artificial stupidity for the equivalent of googling. Their demonstrated inability to discriminate reality from hallucination should be enough to make them totally untrusted. LLMs don't know anything and cannot think to even the smallest extent. They are just predictors of the next word, and that should never be confused with capability.
    • I think, given the usage model described in the OP, I'd never ever experience the wonders of the 400kW upgrade. What I really need is boost from 2000rpm and probably no more than 260-270rwkW. But I suspect that the highflow is not actually the turbo for that purpose, so I may in fact need to get a G25 or 30 or something right sized and very spooly. We shall see after it is tuned. I've had to back the boost and boost ramp off to stop the thing from pinging since the highflow went on, so I've been almost living the NA life for 9 months now! Injectors are recently in hand. AFM is in hand. Dyno is fixed. Just need to clear a queue of f**king Supras out of the way (and probably fit my new gearbox). So....some time this year? Lol.
    • For what I gather is a Sunday/summer car....braided is fine. You're not going to be left without a vehicle and you have plenty of time for inspection/maintenance. Oof. I wouldn't use them that way. They can probably handle the temperature** but the internal corrugations means that their flow characteristics are a bit shit. Lots of extra friction and pressure loss. Makes them flow like the next pipe size down. ** They are stainless, and the stainless can usually be at least something like 304L, which is pretty good at higher temperatures (unlike 316L, which I would use for a wrt/corrosive environment, but not a particularly hot environment). But the welding needs to be top notch. And even then, because you usually need at least one cone-seat end on them (because you can twist the hose and do up both ends at the same time unless one of them is a union) they can be prone to coming loose with heat cycles.
    • I don't have the OEM oil feed lines though and the turbo-wraparound line is torn, only has water. My plan is to get replacements for these and just connect a braided line to there. And make sure it's leak free. Hoses like these are also sometimes used to connect external wastegates, so for an EGR I think you're good using them.
    • Alright I understand. The most likely case is probably gonna be that I just keep the OEM unit in the car as long as it works.
×
×
  • Create New...