Jump to content
SAU Community

Recommended Posts

So did you push the car through some corners? Understand if you didn't as its not your car ;) On tighter tracks an evo is leagues ahead. On a more open track the Big R will lay waste to an evo HP pending of course lol

I did and it does. Though my car is pretty much set up properly as well.

Edited by Mick_o

As an owner of 3 Emos previously (6, 7 & an 8) and now have an R33 GTR I'd say go the GTR! But... and it's a big butt:

You need deep pockets to run a GTR as they have huge weight & power & that equals many sets of tyres & brakes. Plus they arent cheap to fix/maintain full stop.

The Evo's only ever lasted 6 months & I got bored. the 6 speed gearbox made the 8 so much better than the 6 & 7 I had but the handling was still 1 dimensional & boring on a track. However, on the road the Evos are more playful & more fun for it than the GTR by miles! The GTR feels too big & slow to respond...

Not sure I've helped here...

My work is done.

Not at all lol

The car will be mainly used for track duties with the odd occasion of going for a cruise. Ive come to the conclusion that I need to just go and drive a couple, I'm sure one will jump out at me more then the rest.

Ordinary is that your GTR videos on YouTube ?? Ordinarydriver ??? I assume it is.

The only thing that sways me to a EVO is the cost of running and mechanical strength at the track. Cheaper to run, cheaper to fix and just as quick.

But then again GTR's seem pretty bullet proof upto 250awkw, besides the oil starvation issue at the track and filling upto the bump in the stick seems to fix that problem.

Last thing I want is to spend around 20k on a car then need to spend another 10k on an engine rebuild in a year or so. This is where the Evo seems to have the edge in reliability. But then again anything can happen at the track.

The only thing that sways me to a EVO is the cost of running and mechanical strength at the track. Cheaper to run, cheaper to fix and just as quick.

But then again GTR's seem pretty bullet proof upto 250awkw, besides the oil starvation issue at the track and filling upto the bump in the stick seems to fix that problem.

Last thing I want is to spend around 20k on a car then need to spend another 10k on an engine rebuild in a year or so. This is where the Evo seems to have the edge in reliability. But then again anything can happen at the track.

How much have you tracked before if you don't mind me asking?

A stock gtr vs stock evo umm yes an evo is leagues ahead. .. A Stock GTR is a nugget ;)

Only cos Nissan got lazy and sat on their asses. Look at the incremental development with the evo over the years and compare that to the GTR. An R34 isn't that much better over an R32.

& of course your 9 is a couple generations younger than even the latest model R34.

Evo doesn't hold a candle to a GTR in terms of road presence too.

Dollar for dollar though, evo does win hands down. A 20k evo 8 would go a lot better round a track than a 20k 32GTR.

I 100% agree with that mate nothing says gtfo of my way like a GTR does on the road and on the track too! :D

I might be slightly biased to an evo owning 1 But pretty much all my mates own gtrs and i LOVE THEM so dont think im hating on GTR'S for a second here but im sorry reality is an evo is a better track car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It was roughly 3.5 hours.    car went in around 11:00 and I was done around 2:30 He did the initial runs, install the BC and then Nistune install and tune.  The best part was sitting in the lobby and hearing the skyline on full throttle at the dyno 😂😂
    • Glad it all went smooth. How long did the tuning process take?
    • Yeah that was kind of the same feedback my tuner gave me.  the boost tee is until I can sort out my plan for the electronic boost controller and what I’d get, where I’d mount the dash etc.  I’m happy with this until I can figure it out. Not a big fan of the A-pillar gauges. I’d like to get a clean install of the boost gauge - something digital like GFB.  Something like that might fit neatly where the ashtray is and look clean. I feel like replacing the OEM triple gauge is a bit extreme for a weekender like my skyline. And it’s not making crazy power to need all the additional sensors/gauges. 
    • I'm about to swap my box to Tremec T56 Magnum F & initially thinking of re-using my DCS twin plate (can get it re centred for the bigger spline) but it's been called out the box will be noisy (rattle) as the clutch is unsprung.  So I'm doing as much research as possible. I'm not so worried about holding the power as I'll go the track version which on paper will hold the maybe 1000hp I make. It's the longevity I worry about. DCS told me they don't use a sprung centre as it's just something that can break. The uni clutch has a very complicated sprung centre. Any one had or heard about any issues with it failing? Thanks in advance.
    • Auto is at least 10% (from my real, actual experience with different torque converters and manual on the same setup) ~185rwkw at 11.6psi (peak!) is entirely what one would expect without a FMIC or anything else on the intake, it does bleed off towards the higher RPM so it's what, 9psi there? Note: There is nothing that can be done about this with a manual boost tee. If you want to hold it steady and gain more top end, well - You will need electronic boost control.....
×
×
  • Create New...