Jump to content
SAU Community

Recommended Posts

We need a price of investment v mods v kw approach for assessment on this forum

I have paid lots of $$$$ to get faster

Other times I have paid bugger all and the car was just as good

Would be a awesome feature on this forum

If you are happy, it's a bargain.

yeah.. Yavus is the professor. His background is from a engineering / emissions development on massive diesel machinery.

He gave all that up, big $ job so he can focus on his hobby... Unigroup Engineering.

+1 for unigroup!

I have quite a few people I have a lot respect for the opinions of who rave about Yavuz, so this thread doesn't surprise me :) Very nice - good results, and good show giving credit... often feels like there are too many threads bitching about tuners and products so it's a refreshing post to read :)

Thats a damn solid result with 5's on a 2.6L Marko nice area under the curve! Looks like a blast to drive. Was at unigroup when your car was on the dyno and and they were just starting to add 98 to the mix... Very nice car mate :)

Thanks for the compliment Mick :)

The guys too were impressed with the results and exceeded their expectations, the head is stock! Literally just has some bolt on mods, very mild setup.

Brett - it does skids only with the handbrake haha, I'm sure u would be happy that I followed suit with Paul and replaced my GTRS's so now u can update your Sig :)

One of my mates has had his S15 tuned at unigroup, mild mods, only making 214rwkw, it feels more impressive than other much more "powerfull" cars. (tuned elsewhere)

Well actually, its awesome, chalks 3rd. Customer service is beyond good, will be getting my cefiro tuned there once I've got the highflow on.

Thanks for the compliment Mick :)

The guys too were impressed with the results and exceeded their expectations, the head is stock! Literally just has some bolt on mods, very mild setup.

Brett - it does skids only with the handbrake haha, I'm sure u would be happy that I followed suit with Paul and replaced my GTRS's so now u can update your Sig :)

lol no won't be needing to change my signature cause it's still true and the word needs to be spread to the people

I have quite a few people I have a lot respect for the opinions of who rave about Yavuz, so this thread doesn't surprise me :) Very nice - good results, and good show giving credit... often feels like there are too many threads bitching about tuners and products so it's a refreshing post to read :)

agreed =)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The max they would go for me is 50.
    • That cannot have been a fun set of drilling. The stock "baffle" looks identical to rb26, I just cut fuel cell foam to fit the full length under the baffle.
    • I understand your sarcastic exasperation. But to be fair - the baffles do indeed fit OEM cam covers. They did omit to say that you need to do a bunch of stuff. But they do fit them.
    • Got started on the modification to make these splash plates fit over the long weekend. First the surprisingly time consuming task of swapping all the cam cap bolts to Tomei cam cap studs. I did the method of removing one bolt at a time, applying loctite to the stud, double nutting to torque as the manual described. Then carefully unlocking the nuts without disrupting the torque of the stud (and going back to re-torque a few times when it slipped). Finally applying the nut and torquing to spec. Repeat x28 Next up I went about removing the stock cam cover baffle so I could ensure it was fully clean after drilling for stud clearance.  As the blind rivets holding the baffle on were domed I used a punch to mark the center then used 4mm drill bit to carefully drill out the rivet without going too far part the baffle. As seen in other thread here is what is inside the stock baffles I decided on M4x6mm bolts to bolt the baffle plate back on with. I used a 3.3mm drill bit with some tape to mark the depth at ~8mm. Next was to tap the threads using a cheap bunnings kit M4x0.7. With the baffle removed I also drilled out the spot welds holding in the baffle plate oil returns. Unsure whether this was the best option or if I should have cut holes in the Hypertune splash plates to allow the oil drains to still function... time will tell. I then removed the the Hypertune splash plates so I could rest the cam cover on top and use a dab of grease to mark where the studs impacted the oem cam cover baffle. The most obvious spot was on the hump from the stock mesh is held. Using this hole as an anchor I bolted the oem baffle plate back into the cam cover and lined up the Hypertune splash plate. Marked the rest of the holes for the studs and drill those out too. Total 32 holes drilled and 12 threads tapped on the passenger side cam cover alone for this bolt on part that totally clears all OEM cam covers.. Drivers side next as well as some E85 safe fuel foam to fill the space behind the behind cam cover baffle plates. oh and some lock nuts for the splash plates of course.
×
×
  • Create New...