Cams To Match Precision 6266

[d-ranged]

need some cams to match my turbo which is a Precision 6266 Dual Ball Bearing.

I would like to gain some low down torque.

Is 264/272 a good setup for this? If so that's what i would be looking for but other options welcome.

[Ben C34]

I think you need to specify the use of the car, and what revs you consider to be low to get a correct cam.

[d-ranged]

Its a street car wont ever be dragged or tracked.

I wont be revving it more than 7500-7800.

It hasnt been mapped with the turbo yet so i dont know what sort of boost it would come in on. I dont really know much about cams so just need some help and advice.

[Piggaz]

Nothing over 260.

Even the Mines 252 at 10.05 would be a nice cam for that.

[NYTSKY]

Stock or if you must, Poncams.

[SiR_RB]

I've ran my stock cams with a 6266 making 410kw,,,didn't make more cos injectors were maxed

[Pezhead]

If you decide to order Tomei cams. Check RHD. I got mine on special there and I see they are still pretty discounted.

[d-ranged]

Thanks for the info guys, i will stick with stock then