Jump to content
SAU Community

Recommended Posts

Hey guys, I have here a 1990 Nissan 32 GTR that i need gone as soon as possible.

No Swaps.

1st owner in Australia.
1990 32GTR.
130,416 km
HKS pods.
HKS boost gauge.
Blitz EBC.
Genuine 18'' BBS LM's wheels.
Tien coilovers.
Stock turbos, turbos will need replacing.
Rocker cover seal needs replacing

Car is garaged and has not been driven since turbo has been whinning.
Car was rarely driven.
Always looked after, very clean inside and out.
BP Ultimate always used
Non smoker.

No RWC.
No REG, exp Jan 3rd
Plates NOT included

Need the car gone.

I'm asking $14,000 but im very negotiable

OPEN TO REASONABLE OFFERS WILL BE CONSIDERED!

post-64311-0-45022400-1392699243_thumb.jpgpost-64311-0-21644500-1392699209_thumb.jpgpost-64311-0-09655500-1392699191_thumb.jpgpost-64311-0-75581400-1392699294_thumb.jpgpost-64311-0-21217600-1392699337_thumb.jpgpost-64311-0-06905000-1392699382_thumb.jpg

post-64311-0-60632400-1392699525_thumb.jpgpost-64311-0-22772200-1392699553_thumb.jpg

Edited by .jonno
Link to comment
https://www.sau.com.au/forums/topic/439326-1990-nissan-skyline-32-gtr/
Share on other sites

what's it need for RWC? i'm guessing it's not capable of passing is if your willing ot supply one?

When the car got imported there was no problems getting it a rwc, i just don't have time to get one.

I havent made any changes to the car since

can you offer an assurance (in writing and co-signed by an attorney) that if it won't pass a roadworthy in it's current form, that you will either pay for all work needed to get it to a roadworthy condition, or supply a full refund of the purchase?

I, and i'm sure other's on here have been burned before with people claiming the car is road worthy, when it in fact needs thousands spent to get it to a roadworthy condition, i can tell from the picture's that it's likely to low, and if the rocker cover gasket needs replacing then it's fair i think to assume it's leaking oil from there, since you've claimed it it should have no trouble passing roadworthy, but there's clearly at least 1, possibly two items that may need addressing in order to get it to pass, what else might be wrong we're not being informed of?

Edited by ttoks
can you offer an assurance (in writing and co-signed by an attorney) that if it won't pass a roadworthy in it's current form, that you will either pay for all work needed to get it to a roadworthy condition, or supply a full refund of the purchase?

I, and i'm sure other's on here have been burned before with people claiming the car is road worthy, when it in fact needs thousands spent to get it to a roadworthy condition, i can tell from the picture's that it's likely to low, and if the rocker cover gasket needs replacing then it's fair i think to assume it's leaking oil from there, since you've claimed it it should have no trouble passing roadworthy, but there's clearly at least 1, possibly two items that may need addressing in order to get it to pass, what else might be wrong we're not being informed of?

Wrong section, I think your after " brand new cars for sale" section.

can you offer an assurance (in writing and co-signed by an attorney) that if it won't pass a roadworthy in it's current form, that you will either pay for all work needed to get it to a roadworthy condition, or supply a full refund of the purchase?

I, and i'm sure other's on here have been burned before with people claiming the car is road worthy, when it in fact needs thousands spent to get it to a roadworthy condition, i can tell from the picture's that it's likely to low, and if the rocker cover gasket needs replacing then it's fair i think to assume it's leaking oil from there, since you've claimed it it should have no trouble passing roadworthy, but there's clearly at least 1, possibly two items that may need addressing in order to get it to pass, what else might be wrong we're not being informed of?

You can fork out $100-200 or even ask some of the people on this forum to inspect the car. Best thing to do is get an official inspection, which will outline everything from the body and paint to all engine specific. If you want a cheap but roadworthy car, this would be the way to go. Everybody knows that GTR's dont usually go for $14k, so you would be expected to have a few g's ready for unexpected occurences.

can you offer an assurance (in writing and co-signed by an attorney) that if it won't pass a roadworthy in it's current form, that you will either pay for all work needed to get it to a roadworthy condition, or supply a full refund of the purchase?

If you think an R32 GT-R you buy for 14k is not going to have a single thing wrong with it, you're absolutely playing with yourself.

If you think an R32 GT-R you buy for 14k is not going to have a single thing wrong with it, you're absolutely playing with yourself.

This is some of the best advice money can't buy!

Great starting point though, GLWS!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have done a lot of research before posting here and on gtruk forum. couldn't find anything. I have my gauges all part except the needle itself. the needle has a extremely small hole in the center, but the shaft going to the needle is extremely small and appears to have nothing to index it either. doesn't seem strong enough to simple pry or pull without damaging something. Already tried the old spoon trick on a extra triple meter I have from a gtt, but no luck. the center cap comes off easily but the hole in the meter face plate aren't big enough to get over the needle itself. figured this would be my best place to find someone who might have actually removed theirs. wonder if there is some type of small pin press tool to push the pin in while pulling the needle base off.
    • Ok...its taking me long enough to finally do this.  Feck financial security...heart disease will get me soon enough anyway So welcome to the garage..."Clem" Belsil80 has been running a 370Z in Super TT series. So after entering with him in last years Winton 300 i figured I  need my own car. Seems SAU Vic race cars need to be yellow....{tick} Reckon with enough motor i will be able to make up for the lack of talent and stay ahead of the 370Z... but the LS powered S13 and E36s are a ways up the road Aim is to have a car that doesnt stop or turn but has a bit of shed built motor with jam...maybe some cream  First step is getting this ex drift car log booked I am keeping faithful silver car. As the road-club car gets upgrades the race car wil get the sloppy seconds
    • Assuming that they will come off without damage at all.... i would have thought just pull straight up off the spindle with a something or other than can reach underneath. Have you searched for youtube vids of people doing similar on R34s or any other Nissan from the same vintage? They should be the same technique, in all likelihhood.
    • Keeping in mind that sandblasting is really aggressive on softer metals like cast alloy, and you can do damage that you might regret. For trash wheels, not a problem. For wheels with value/scarcity issues, etc.... perhaps a less aggressive media is a better choice?
    • Don't get all high and mighty. Experienced spanner wielders know exactly what effort is required to release an Oof.
×
×
  • Create New...