W/temp & F/pres

[Fat32gtr]

Hi I'm in the process of installing my greddy d/a multi guage on my r32 gtr. Just need Info on some things, if anyone is willing to help.

F/Pressure sensor- would I need to upgrade to an aftermarket F/Pressure Regulator or is there anywhere else I can tap it from?

W/Temp sensor- I want to run x2 W/Temp sensors. The original one on the dash cluster and the greddy. Is there some kind of a T piece fitting I could use?

[GTSBoy]

You can tee a fuel pressure sensor in anywhere between the fuel pump and the inlet of the fuel rail. Just after the filter in the engine bay is a good enough spot.

You can't really tee water temp sensors in. The factory one needs to stay exactly where it is so it actually protrudes into the flow. If you want to put any other temp sensor in you will need to tee it into a hose. You can buy fittings to go into a (cut) radiator top hose. There are other places you could put it too. Or you could use the other factory water temp sensor (the single wire one for the gauge) if you didn't mind losing the dash gauge.

[Kane_R32]

There are other places you could put it too.

Something like this would work..

http://www.ebay.com.au/itm/BUDDY-CLUB-radiator-hose-sensor-adaptor-34-mm-NISSAN-CA18-SR20-RB25-RB26-RB20-/251016405762?pt=AU_Car_Parts_Accessories&hash=item3a71be6302

Just make sure its the right diameter for your top hose...