Jump to content
SAU Community

Rb25 Vct Camgear Bolt, Too Far Out Need Replacement

walky01

By walky01,
in Engines & Forced Induction

 Share

Recommended Posts

walky01 Enthusiast

walky01

Posted
Posted

hey guys, i recently posted up why my VCT was leaking, bought all parts and now it seems like my Bolt holding the VCT camgear in is out too much, the washer looks very thick, not like a normal flat washer, is that normal? the bolt sticks out so much that i cant put the VCT cover plate spring and 4 little bots on. an help appreciated !

Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted

if you jiggle it you will feel there's a groove it goes into, I suggest you pull off the timing belt to get in into place

once it goes into place then hold the cam with a wrench and torque up the nut.. it will then sit flush and allow you to put the spring/cover/seal on

Ben C34 Grand Master

Ben C34

Posted
Posted

Because you have different cams I would not activate vct until you know you can. Cams with more overlap cant run vct or else the inlet and exhaust valves could hit.

Obviously you need to fix the leak though but dont plug in the solenoid until you are sure its ok.

walky01 Enthusiast

walky01

Posted
  • Author
Posted

they are standard rb25 cams reground, the engine has gone through two guys here, dondenaso (i think thats how you say it) and Skit_r31 both same setup.... not sure if you have seen them on here before, in the n/a section.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      Update time!  The JZX110 had some maintenance needing to be done, so a lot of the seals with replaced to fix some oil leaks. Also used this opportunity to whack on a front mount that I'd bought some time ago.  I also finally got the rear lip painted and fitted.  I then got the exhaust done. It's just a catback for now. Custom made 3" stainless with a turn down. I could have a tip coming out, but it will require cutting the rear lip and possibly the bumper itself. So far I do like and it's made the car a little more zippy.  Close out with some nice pictures of the cars and a sneak peek of what's next. 
    • MBS206
      Can't put strut back

      By MBS206 · Posted

      Once you learn it all, you find you do the job once. But this is the best way to learn, as you won't forget the lessons
    • Rezz
      Anyone know what this front bar is for series 1 R33??

      By Rezz · Posted

      Edit: It's now known as "R Performance" and is still in operation.
    • PranK
      The FD RX7 is the best looking 90's JDM car

      By PranK · Posted

      This lady loved her FD for 25 years!  https://www.topspeed.com/80-year-old-woman-donates-fd-rx-7-mazda/ My brother in law. He's nice enough to let me drive it whenever. He'll likely not see this, but I'll try: @r-is-for-fun got any pics?
    • Rezz
      Anyone know what this front bar is for series 1 R33??

      By Rezz · Posted

      Just something I found searching for more info on Emotion R, apparently the ECR33 Skyline GTS25t was either originally black, or there were two of them, the black one being the original demo car, then building a white one which was part of the 1997-onwards (to at least 2008!) Cockpit Tatebayashi Tokyo Auto Salon booth demo cars. It appears that Emotion R closed down in 2008 and was declared bankrupt in 2010: http://bank-db.com/hasan/208365. Scan of a magazine with the black R33 from 1996: Wayback machine archived page from May, 2000: https://web.archive.org/web/20000529061027/http://www.emotion-r.co.jp/skyline.html Option magazine with a few photos from the Cockpit Tatebayashi booth at the Auto Salon from various years: 2002: http://www.jdm-option.com/photo/index.php?action=item&category_id=154&image_id=3507 2003: http://www.jdm-option.com/photo/index.php?action=item&category_id=137&image_id=3033 2005: http://www.jdm-option.com/photo/index.php?action=item&category_id=116&image_id=1831 In 2008 Cusco website mentions that the Cockpit Tatebayashi ECR33 was displayed at that year's Tokyo Auto Salon: https://www.cusco.co.jp/event/2008/12/post_735.html As of 2021 it appears that the ECR33 demo car ended up being exported to Florida, USA: https://rmcmiami.com/inventory/1996-nissan-skyline-r33-cockpit-tatebayashi-demo-car-big-te06-turbo-endless-brakes-lsd-450hp/ And finally here's Google streetview of the Emorion R garage in 2023 which is amazingly not only still there, but the showroom is still full of various parts in stock and funishings, etc.: https://maps.app.goo.gl/ttyEAZdZLyzermyT9 Apologies for nerding out a bit. I used to love doing this 20 years ago on SAU and got a bit nostalgic for a moment... 😅
×
×
  • Create New...