Jump to content
SAU Community

Recommended Posts

Hey,

NISSAN SKYLINE 1995 R33 GTS-t ( 10 Months Rego )

Engine:

RB25DET – BRAND NEW FROM EMPTY CRACK TESTED BLOCK UPWARDS.

Wiesco Forged Pistons And Rings

Race Doubled Up Slide Pins

Bored out 20Th

New Bearings big ends, little ends

All new seals rear main/complete VRS KIT.

Valve Stem Seals

Head totally reconditioned

Done 630Kms Since Complete Rebuild

All receipts and pictures of rebuild for proof to purchaser

XTR GT35/40 Turbo

Teil 48ml Wastegate w/ Screamer Pipe

Dyno Dave Tuned Length Exhaust Manifold – Work of art.

Custom Made Plenum 80ml Throttle Body

Trust Front Mount Intercooler

Turbo XS Bleed Controller

XTR Turbo Blanket

EMS STINGER 800

Nismo 770cc Injectors

Bosch Motorsports Fuel Pump

NISMO Mechanical 9Plate DIFF (none of this viscous crap)

5Puk Clutch And Pressure Plate 500HP

HKS Air Pod

Silicon Hoses everywhere the silicon hose from the inlet to the Air pod is $500 alone.

Turbosmart Blow Off Valve

Exterior:

All new pineapples and suspension

18Inch DTM wheels

3 ¼ inch exhaust with trust muffler

Remote Central Locking

Full Alarm / Immobiliser

Interior:

Sony CD Player

Odyessy Batter

Car Has Now Been Dynoed 315rwkw on 14psi and 372rwkw on 21psi

Everything Is brand new I regret the need to sell especially just after a complete rebuild the car feels great.

Car is immaculate inside and out

Selling due to the purchase of a house $25,800 ONO

Please email me at [email protected]

[email protected]

Im neg need to sell.

BR

Link to comment
https://www.sau.com.au/forums/topic/44023-fs-skyline-300-rwkw-again/
Share on other sites

Japsky33: Please read the rules or this thread will be closed. Post ALL relevant vehicle and sale information in this thread. A link to the information is not sufficient.

Thank you

the price is too high

Well somebody could always throw an offer in. I do need to sell but offuisly I dont want to lose to much money..

I dont think its overpriced the grin factor this car can produce on anyone is worth every dollar.. You havent felt 500HP in a skyline before have u ?

Anyways thanks for your input :rofl:

JH

*also having problems with selling my GTS25t*

people like it, but want it cheap - nobody except us understand how worth is it..

good luck with GTS25t sales to all of us

Hey guys thanks! I was not getting many responses so thought it might have been priced way to high which was concerning considering the car owes me over 39K which is 10 thousand less then Im asking I dont want to lose much more then that.

Thanks again I'll have some patience.

JH

the car sounds great i just sold my stock R33 and would love somthing like this but i think the problem you might have is why would some one pay 29,000 for a GTST? thats the problem i feel that buyers today have!

they would prefer to save a little extra for a GTR that may hold value a little better and possiably more reliable. (not saying that this package is not reliable)

free bump anyways.

I would say that this engine is realiable due to the fact that it is forged pistons.

as RNS11Z said Inless you have built an engine up your self then you have no idear how much it cost and the time put into it.

Then again for eg, if you save more you'll be getting for around 35k a thrashed gtr with high klm's with stock internals.

nice car & good luck with the sale,

Cam

HI Cameron,

Yeah look you can buy R32' GTRs for 20K upwards but just how good are these cars at the age / condition people dont buy gtr's to treat them nice they have all travelled about 150 thousand or more and had a hard life doing it.

THis is a fresh motor forged internals its got a whole life in front of it and can be taken further (Why you would want to) I ahve dropped the price to 27800 if anyones interested at the new price.

BR,

JH

I would say that this engine is realiable due to the fact that it is forged pistons.

as RNS11Z said Inless you have built an engine up your self then you have no idear how much it cost and the time put into it.

Then again for eg, if you save more you'll be getting for around 35k a thrashed gtr with high klm's with stock internals.

nice car & good luck with the sale,

Cam

Hi,

Standard Rods, EMS STINGER ECU

Yeah I would rather sell it but I have recently sold another one of my car's so Im ok for the moment. And a GTR is something I would like to budget for.

BR,

JH

Have the rods been done?

what ECU?

What's the reason your selling? you said you need money because of the new house but you will trade up or down on a GTR etc....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Sadly I can confirm if you are actually seeking to drift, you will quite easily spin up one wheel. Even if you're going in a straight line. I am not entirely sure of the metrics/terminology here but there's only a certain amount that the helical will actually spin both wheels. I've seen it on video with my own car where two lines of smoke switch over to just one after you really get in to it. Unlike with a clutch diff where you can keep your foot planted until the car regains grip, in my experience with the helical you want to be utilizing traction control allowing LIMITED slip or lifting (partially) when you start to spin up both tyres with a Nissan helical. Which makes them pretty sub optimal for drifting duty. That said... this is probably a helical on numbers alone. Just put the Kazz in
    • Let's just fix the problem by f**king the rest of the gearbox.
    • Unlikely, as per Greg's post. This is not helical diff behaviour unless one wheel is up off the ground. Shimming what? You don't "shim" a mechanical LSD. Probably not in the sense that you have heard of people "shimming" a diff. And the process that Nissan f**kwits call "shimming" a diff involves super-preloading a VLSD cartridge against the side of the diff to create a friction/wear point (in a place that it wasn't supposed to have one) to make the sloppy, useless, viscous diff into a hybrid viscous/mech abortion. In case it isn't clear, I consider the process to be stupid. Nike.
    • How much does the shifter move when the car is in gear with the engine off? If it is more than about 1cm you need to replace your shifter bush. Your shifts will just get crunchier, not faster, with a short shifter unless you also rebuild the whole box
    • I should video mine, will prob do it tomorrow    Between 1st and 3rd, you could fit another two gears. That is how loose and wobbly it is   horrible:(
×
×
  • Create New...