riceline Posted June 21, 2004 Share Posted June 21, 2004 Hey guys. I have got a R33 RB30DET running the RB25DET head. It has come time that I want to do more upgrades and don't want to run low on fuel supply. After talking with SK i have found out about a fuel pump (Bosh 044) now I'm keen on finding out about injectors and fuel regulators. I have got a R32 RB25DE fuel rail that I would like to use on it because it has the ability to use top feed injectors (rx7 550cc injectors). Is this possible at all? Running it will not be a problem (I think) as I'm going to be getting a power fc to run it all. Also was thinking of using a Malpasi Rising Rate regulator. I'm hoping to get about 300 - 350rwkw But I will be VERY happy when I am able run a mid 12 and will most probaly stop for a while when I get to this point (GF want's to get some Land and start house shopping and has agreed to let me keep spending money on the car till it runs a mid 12) I have done some searching on here for info about using this setup but the thread I found was stopped half way through the process.. Take it easy guys Link to comment https://www.sau.com.au/forums/topic/44075-fuel-rail-swaps/ Share on other sites More sharing options...
riceline Posted June 22, 2004 Author Share Posted June 22, 2004 Bump Link to comment https://www.sau.com.au/forums/topic/44075-fuel-rail-swaps/#findComment-902662 Share on other sites More sharing options...
Sydneykid Posted June 23, 2004 Share Posted June 23, 2004 Hi riceline, I think your question is "can I use an RB25DE fuel rail on an RB25DET inlet manifold", is that right? Sorry I can't really help, I have used an RB25DE fuel rail but it was on an RB25DE top end (including inlet manifold). The Series V RX7 Turbo injectors fitted up to the fuel rail OK, the o'rings and injector wiring harness plugs where different though. Link to comment https://www.sau.com.au/forums/topic/44075-fuel-rail-swaps/#findComment-903451 Share on other sites More sharing options...
MonstaS4 Posted June 23, 2004 Share Posted June 23, 2004 Series 6 13B's and cosmo 20b's have 550cc side feeds which can be made to fit in the standard RB25 rail by either using a set of Sard or D-Speed collars or machining some up yourself ($250-$300 v's $10 + a few hours of your time!) Plugs are different, but i think laser/mazda 323 plugs are the same. I'm yet to prove this though as i'm in the process of making the collars atm. Try this.... http://www.nissansilvia.co.nz/tech/howtous...0Binjectors.htm Link to comment https://www.sau.com.au/forums/topic/44075-fuel-rail-swaps/#findComment-903556 Share on other sites More sharing options...
riceline Posted June 23, 2004 Author Share Posted June 23, 2004 Hey SK yeah thats basicly what I am asking. can I use an R32 RB25DE top fuel rail on an RB25DET inlet manifold and head. Clearance will not be a problem as I have got a custom frount facing plenum. Thanks guys. Link to comment https://www.sau.com.au/forums/topic/44075-fuel-rail-swaps/#findComment-904183 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now