Jump to content
SAU Community

Xtreme Twin Plate Ceramic Clutch

craziichriss
 Share

Recommended Posts

frostyboy Collaborator

frostyboy

Posted
Posted

NOT EBAY BRAND

Australian built clutch

my one didnt seem like it was ceramic more like a brass compound

pedal effort is easy like stock but a very bighty clutch in a rb it was a challange to get used to its not really a clutch that can be ridden

its the cheapest twin plate clutch on the market that i could find anyway at $1300

it will hold up to 550hp so they say

at the moment its all good at 460rwhp

I also have a ceramic twin plate xtreme clutch in my 680rwhp F6 typhoon holds the power okay

hope this helps

Link to comment
Share on other sites
GTRPSI Mentor

GTRPSI

Posted
Posted

Just because something is sold on ebay does not mean its cheap crap.

Extreme is a good brand, made in South Australia i think from memory, ive spoken to them before as i was going to carry their line of clutches, they are good, they stand behind them, they are cheap because they are looking to break into a market dominated by exedy, from memory i think some of the components to make them come from exedy, just like NPC and Jim Berrys clutches.

  • Like 1
Link to comment
Share on other sites
Sinista32 Grand Master

Sinista32

Posted
Posted

As said above it's Australian and Extreme are #1 award winning for the last few years now.

I run the twin plate ceramic clutch in my 32 GTR. A reasonably new uprated model for the 32GTR push type.

I rate it very highly. (so far as it's only been a year)

Previously used the OS gieken twin plate.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Lithium
      Boost level and torque curve

      By Lithium · Posted

      There is a LOT of stuff that can be done, it all depends on how much time and money you want to spend on doing in.  Not all ECUs will be able to do it, and the more control you need the more time and knowledge needs to be put into making it work.  If you're willing to spend the time and money and have the right hardware and skills involved there's a lot that can be done. 
    • thx78
      Boost level and torque curve

      By thx78 · Posted

      I am impressed with all this level of adjustment. I didn't expect all this possibility
    • Lithium
      Boost level and torque curve

      By Lithium · Posted

      Correct.  In the case of the 500kw dyno plot I showed you the car actually runs two boost control solenoids for boost control and a 5psi wastegate spring.  It allows me to control how much boost pressure is applied to both sides of the wastegate valve at any point and fairly accurately control boost target as a result. I've tuned it so that it's able to target anywhere from 5psi to 25psi depending on what's needed.  The target tables I've set up in that car are Gear vs RPM, so every gear has potential for a different boost (and torque) curve.   First and second gear have quite low boost targets, third gear actually has different target boost all the way through the rpm range as it's a stock RB25 gearbox - the boost targets have been chosen to maintain a peak of 600nm (what the owner has set as the maximum torque he's happy with putting through the stock 3rd gear) but it carries that to the rev limiter.   The boost curve to achieve that is something of a ramp up, then hold, then ramp up again and the power curve looks more like a flat line haha.  
    • thx78
      Boost level and torque curve

      By thx78 · Posted

      so you can decrease or increase the boost depending on the diet as you wish?     by acting on the wastegate?
    • Lithium
      Boost level and torque curve

      By Lithium · Posted

      That's torque and power, it's all from a single run.  The boost curve is "held back" from it's peak target in the 3500rpm to 5000rpm range from memory, so it ramps hard to something like 18psi then climbs more progressively to 23psi nearer 5000rpm.   It makes the torque (and power) ramp more "natural" and less hard on parts and traction, it doesn't feel artificially held back.   
×
×
  • Create New...