Swap In Turbos For 32's

[fijiboy-jb]

Want to replace my current turbo in a 32. The turbo is a series 2 R33 turbo but was wandering what other turbos bolt on to 32's either nissan or aftermarket.. Heard 34 turbos go straight on and also are better because they have a ceramic wheel.. Any help would be highly appreciated

[Cadmoon]

Series 2 R33 turbos also have the ceramic exhaust wheel. Have you thought about getting your current turbo highflowed?

[fijiboy-jb]

My main reason for swapping it out is that it has a whine at low RPM and I believe it is on it's way out.. At the same time I still want to add a little power without doing too much. I'm on my P's and need to be minimalistic to not stir trouble whilst I have my exemption

[Cadmoon]

You can get about 10 psi from a 33 turbo fairly safely, if you buy another 33 or 34 turbo you can hold out till your current one shits itself then swap it over.

[HiveFleetAbyss]

If a 33 turbo drops straight in a 34 should bolt straight up as well

[fijiboy-jb]

I think that is part of the problem I bought the car with a boost T attached and it runs 15psi.. That's why I am considering going aftermarket to run the same psi if not more and do it safely

[Sinista32]

Highflow your current or HKS2530

2nd hand ceramic is likely to turn to dust also

[fijiboy-jb]

Yeah so I have been told about 34's bolting straight on.. Wouldn't go past buying something aftermarket that suits as well, just so I know it wont die out a week after I put it in

[Bunta]

Hi flow for sure