Jump to content
SAU Community

Recommended Posts

Hi every one

i am apter a large oil capacity sump for my r32gtr and was wondering if anyone has one for sale or has had one made and can recommend.

I am in launceston but i will any where any time to look at sumps.

thanks stuart 0409135950

Link to comment
https://www.sau.com.au/forums/topic/441154-large-capacity-sump-for-gtr/
Share on other sites

Hi jazzadub

I have spoken to rfacefab in nz and tghere price is 800.00 plus 50.00 for bolt in baffle system,the bad part is 120.00 each way for postage and about 6 week turn around,can probaly do better in tasmania and get one fabricated locally,but am willing to pay 500-1000 depending on item.

Hi sinista

how is every thing with you and your gtr?

if i have looked at the same unit it was sold april last year.

I am looking at all options at the moment if i buy from someone great if i build one then also great .

stuart 0409135950

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • https://www.youtube.com/watch?v=KyZDvZmvhik
    • You'd be better off digging a pit and standing under it to shoot it.
    • The easiest way would to be ignore the oscilloscope, grab a multimeter, and make sure all the main connections are right. An oscilloscope will give 99.9% of even technicians so much grief, as they have no idea what things should even look like on an oscilloscope. Which is also even more likely for someone who's first ever major work on a car is this If the battery volts are dropping down so low, the LDV will reboot the ECU, when it does so, it will drop out the start circuit. If this is occuring, the battery voltage should also come back up. Give it a few tests, even simple ones like when you're attempting to crank it, measure voltage from the engine block, to the negative terminal. You might find you've got really bad connections somewhere. My guess is the "new" motor has something like a shit starter motor, at which point, you can swap the starter motor from the old motor, to the new motor. Before I did any of the above though, I'd 100% confirm the battery in the vehicle. Most jumper packs are absolutely useless, especially if a battery has a bad cell for example. Also the new modern "jump packs" if you don't know what you're doing with them, you won't even get them into high current stage. So go back to basics, check the battery, especially with a known good one as a replacement test. Check ALL the wiring, this includes where they're bolted onto the battery, and bolted onto the starter motor. Check all the earth straps are on. Measure your resistances across your earth straps. A good check here is to measure voltage across the earth straps while you're trying to crank it. If you're seeing voltage, you've got high resistance joints! Oh, and once you've done the above, check the battery over again.
    • For most rotisseries, as Duncan has mentioned, you really don't want a full car on it, you want a stripped shell. And imagine how many more weeks THAT is going to add to working on the car...
×
×
  • Create New...