Jump to content
SAU Community

Recommended Posts

after bit more info and feedback re: quaife rear diff on the gtr, anyone running one of these yet?

not sure if its directly swap jobbie, unlike nismo items that require half shafts etc

who here is running one?

already had great things about the front but for the rears not sure if its better than nismo 1.5 option

Link to comment
Share on other sites

Hey Nesh, to have a chat with Terry at Award about rebuilding your standard diff tighter, that's the easiest and most likely cheapest way for pretty much the same result

I don't know about the rear diff but the quaife front diff is a gear résistance limo and doesn't 100% full lock which is what makes it so good for the front where you want the back it to full lock on acceleration

  • Like 1
Link to comment
Share on other sites

bought front quaife diff, was chatting with owner of jjr, he swapped from nismo 1.5 to quaife rear, said difference was chalk n cheese, few other 32 gtr including donut king r35 has it in the rear, no chatter unlike nismo, maintenance free, lifetime warranty etc

has me leaning towards the quaife rear

Link to comment
Share on other sites

bought front quaife diff, was chatting with owner of jjr, he swapped from nismo 1.5 to quaife rear, said difference was chalk n cheese, few other 32 gtr including donut king r35 has it in the rear, no chatter unlike nismo, maintenance free, lifetime warranty etc

has me leaning towards the quaife rear

When doing my rear I was tossing up between the quaife and the Nismo GT pro. I went the Nismo because the Quaife in the rear was just released and there was no feedback around, despite how good it was up the front.

The Nismo, on medium is way too much, I need to back it off and to get back that front drive that the quaife gave prob need to throw some extra friction plates into the transfer case. The Nismo (Atleast on medium) is one agro mofo.

How the quaife would go as a rear, it won't be a bad thing, may be super special but there isn't many people running one as they are so new.

Link to comment
Share on other sites

Go drive an R34 (GTR). Nothing new there. Helical is helical.

Michael, you have both cars, you notice any difference hopping from one car to the other

the other thing to suss out is if quaife requires half shafts like the nismo or other mods

Link to comment
Share on other sites

Michael, you have both cars, you notice any difference hopping from one car to the other

the other thing to suss out is if quaife requires half shafts like the nismo or other mods

Yeah, their two completely different cars to drive on the edge is stock form, as far as drive line is concerned that is, the 34 doesn't always spin both back tyres in the middle of a turn unless pushed very hard making it a bit unpredictable and then by the time you've got them spinning the front has kicked in already pulling you straight, the 32 is the oppersite, in a straight line the 34 has sooo much more initial grip, but most of that is the transfer case being preloaded in the 34

http://m.youtube.com/watch?v=WpQETVmmS7w

At 1.15mins is an example of me pushing hard enough then 5secs later me pushing a bit to hard

I haven't punted it yet with the quaife in the front fitted

I have a spare R32 diff and new R34 gearing which I'm going to but in the rebuilt 32 diff and then jam it in the 34

Link to comment
Share on other sites

pretty much in the same situation as OP..

option 1: rebuilt kit for r200 (250$ + was told about 400$ to rebuilt/retight the diff) should be tighter but not overly tight as a Nismo GT. no worries about bolt-on

option 2: buy a quaife because maintenance free, less chatter, drive smoothly but would still like to know if it's bolt-on affair.

option3: Go for a carbon diff ( most likely used, seen some from 600-1000), heard they were smoother, less maintenance and drive smoother than regular metal lsd.

Link to comment
Share on other sites

Well I have just purchased a quaife rear LSD.

Pretty certain it will need modification 'as early R32 cars will require the stronger later driveshaft flanges to use this' whatever that means.

Link to comment
Share on other sites

Well I have just purchased a quaife rear LSD.

Pretty certain it will need modification 'as early R32 cars will require the stronger later driveshaft flanges to use this' whatever that means.

correct, emailed Tim @ SVS and he confirmed using later model half shafts which are stronger as it has larger internal spine size, not a problem if your car is already late model 32 or 33/34 and non v-spec, straight bolt-on
Link to comment
Share on other sites

Did you happen to do the front too, Ants while the engine was out?

nah. If only I knew this then.

I will be doing the front soon as well.

But will test out rear first.

Link to comment
Share on other sites

Well I have just purchased a quaife rear LSD.

Pretty certain it will need modification 'as early R32 cars will require the stronger later driveshaft flanges to use this' whatever that means.

Yes I just picked one up too... so I got the front and rear! In a R33 GTR however.

Link to comment
Share on other sites

Yes I just picked one up too... so I got the front and rear! In a R33 GTR however.

nice. When you did the front one how did that compare to standard setup?
Link to comment
Share on other sites

nice. When you did the front one how did that compare to standard setup?

The front one is right next to my foot still under my desk at work soon to be joined by the rear one! Slow build man, you will find out before me fortunately for you...

I think we got the last ones before the price rise too! :)

Link to comment
Share on other sites

The front one is right next to my foot still under my desk at work soon to be joined by the rear one! Slow build man, you will find out before me fortunately for you...

I think we got the last ones before the price rise too! :)

Lol I know that feeling having performance parts under the desk.

Yeah, that is BS re: price rise.

I really don't want to fork out almost $2K just for a diff when they are being sold for almost half that price in the states.

http://www.frsport.com/Quaife-QDF3L-ATB-Differential-Nissan-Skyline-GTR-R33-R34-front_p_29114.html

Just waiting upon some more diff bushes and new diff bearings and then will get it installed.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • Much less twat-tastic. CF wheels are too garish for civilised use.
    • From there, as the manual says....assembly is the reverse of disassembly, no tricks worth mentioning Much better (for me)
    • In my case, the standard wheel I had was in good condition but the buttons had more wear, so I swapped them across from the original wheel from the car. The plastic rear cover is held on by 4 tabs, and once the wiring is removed you can get access to 2 screws on each side the hold the buttons in From there I just swapped the wiring over. What was interesting is the standard style wheel is 2.0kg but the carbon fibre one is 50% heavier at 2.9kg. It even has a weight inside the wheel at the top to make up for some sort of imbalance in the design. weird
    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stomp on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
×
×
  • Create New...