Nistune For Gts-T R33

[dtf101]

Hey guys,

Was just after some help on what else I need to run a Nistune ECU on my series 2 R33. I've alreaday got the Z32 afm and plug but apparently theres also a different ECU you need to buy in order to run a Nistune with my car.

Thanks!

[Badgaz]

you have to use a r32 ecu (lose the VCT) or a z32 ecu (keep the VCT) if you can find one of those cheap enough....otherwise just get a powerfc.

[GTSBoy]

You don't have to permanently lose VCT if you go with an R32 ECU though. All you need is to install a window switch of some sort and get it back.

[wolverine]

Why use Nistune?

[Ben C34]

Why not actually contact nistune and ask them what you need?

[Guilt-Toy]

http://www.ebay.com.au/itm/221404415403?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

PM me if you want to buy it and il give you a discount.

[Mick_o]

THIS! X11ty Nistune on a 33 is rubbish! Been there done it & it failed sadly unfortunately!

Why use Nistune?

[Badgaz]

Why not actually contact nistune and ask them what you need?

its on there website.

[dtf101]

OK cool. Never knew they had a website, ill check it out.

Looking at Nistune because its cheaper and more around my budget.

[dtf101]

Will the Power FC work on both Series 1 & 2 RB25?

[GTSBoy]

Yes it will. But autos are a problem.

[dtf101]

Yes it will. But autos are a problem.

OK thanks.

Does anyone know if a Bee*R Rev Limiter will work with the PFC? I've heard stories that they dont work together?

[Ben C34]

Bee-r...

Have you heard they are shit and pointless?

Edited March 31, 2014 by superben

[Blackkers]

Are they pointless? I thought the only attraction with them was to get a ignition cut vs fuel cut rev limit. Might be useful if you are drifting and love to bash the limiter.potentially keeping it from unwanted lean condition.

also nothing drops panties like flames out the tailpipe right?... guys?

[wolverine]

Sell BeeR, buy PFC and say thanks to SAU for helping even if it isn't what you wanted to hear.

[dtf101]

Lol so do they work together or not?

[Blackkers]

probably

[colourclassic]

If it helps at all, I was planning on getting a Z32 + Nistune for my R33. Called several well-respected tuners based here in Melbourne, and most suggested binning it and getting a PFC.

[Badgaz]

Lol so do they work together or not?

they could probably work together if you can work out what affect having the BeeR take control of ignition away from the powerfc, you'd probably have to set the powerfc fuel cut to be higher than the BeeR one....like a two stage cut i suppose.....

[dtf101]

If it helps at all, I was planning on getting a Z32 + Nistune for my R33. Called several well-respected tuners based here in Melbourne, and most suggested binning it and getting a PFC.

Yeah i've been reading up a lot and everyone says PFC is the way to go. Thanks a lot mate