Jump to content
SAU Community

Evo 9 - Red (Nsw) - Log Books And Low Kms - Excellent Condition


Recommended Posts

Hi,

I'm selling my evo 9, its red and has low kms (59xxx), it is in excellent condition, outside is about 9/10 and inside pretty much 10/10. I have taken excellent care of it and have only used top of the line oils and parts.

I am second owner and i bought it off a very wealthy gentleman from QLD so no expense was spared on his part either. When i purchased the car it was pretty much stock apart from the turbo back exhaust. I have since then modified little bits and pieces here and there (nothing to major).

So the reason for selling it (really didn't wish i had to because it took so long to find one in this condition as I am a very picky buyer) is because I am planning on purchasing a business and putting down a deposit for a home and land package so this money will be well used to help the purchase of these two things.

A quick run down of the car;

- 2006 Mitsubishi Lancer Evolution 9
- Red in colour
- 59xxx KMS with Log Books and manuals with all receipts of any work done to the car (and i mean every little work is documented and business cards to go along with it too).
- 3rd party Pre Purchase inspection completed on my behalf before buying it from the first owner
- I have a paint thickness gauge which you can use personally on the car to show that there are absolutely no signs of resprays or touch ups or accidents on the car.

Modifications;
- Full 3'' Custom Turbo Back Exhaust (made by a reputable exhaust shop in QLD - I will get the name when I can its in the log book and manuals case).
- x3e intercooler piping in black (upper and lower)
- Simota Drop in panel filter - retaining stock air box
- Short Antenna
- Beatrush front number plate holder
- Stock Enkei's powder coated black
- Carbon Fibre front lip
- Carbon Fibre roof spoiler/shark fins/vortex
- Carbon Fibre rear diffuser
- Whiteline Adjustable 24mm Rear Sway Bar
- Whiteline Adjustable HD Rear End links

the photos are dated for the meanwhile, but I will take new photos and attach them soon.

Some information I may have missed out on mentioning but if they come to mind I will edit the post and add it in.

Location and Price;
I am located in Green Valley, 2168, NSW.
Contact number is 0415 605 565 - SMS Pref during weekdays and either call or text on weekends.
Price wise I'm looking/asking for $38000 ono - it is really immaculate so it does warrant the price.

FOR PICS

Gumtree link

http://www.gumtree.com.au/s-ad/green-valley/cars-vans-utes/2006-mitsubishi-lancer-evolution-9-ix/1042523855

Link to comment
Share on other sites

  • 5 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Latest Posts

    • So.... when I'm finally getting around to having my power steering leak sorted, now it looks like I've got the same issue most A/T Skylines are having. My A/T light will randomly come on and I'm stuck in 3rd gear until I turn the car off and on again. Only 3 weeks ago I did a complete transmission service: Oil flush + new gasket + new filter. This came out of nowhere!! It wasn't like the car was driven hard. I drove about 3 mins down the road to get fuel and boom!!!  Anyway, I have a few questions and hope you fine people can help me out here. All questions are in red. 1. The solenoids: I was looking at the parts catalogue in Amayama and I could only find the Solenoids as an assembly. https://www.amayama.com/en/part/nissan/319404ax05 I read in another thread that Solenoid A = 31940-4AX02 & Solenoid B = 31940-4AX05 but the Amayama product has only the code of B. Is this the right part? Can anyone who has done the Solenoid changes or seen them confirm if this is the complete set of A & B?   2. Gasket and Filter: I'm not going to try change the solenoids myself because it seems difficult to do in a home garage with just 2 jack stands. I plan to take it to a shop and get it changed. I was also going to buy the transmission sump gasket at the same time so I don't reuse the same gasket. Should I just use the existing gasket as it has only been on the car since OCT 19th? (~3 weeks) Should I be buying a brand-new gasket and a filter? Does this job involve taking the filter out?   Thanks in advance to everyone. It's hard to find a video of someone doing a solenoid change on a R34 so any help you can give answering my remaining questions would make me less stressed.
    • Yea - From what I have seen from the video, the car idles like any R34 lol 50PSI of fuel pressure is hardly super abnormal, the regulator is working because the pressure remains static when the throttle gets revved, i.e pressure remains the same when manifold vaccuum changes. Bigger pumps on stock rails always bumped the pressure in the rail without using an aftermarket regulator to change that. Do you know what your IAC is actually doing? Has there been any data showing the stepper motor % etc? There's no way your idle is actually moving around the way the cluster(s) are indicating. You would hear the difference with the engine RPM flying to 3k and 1k in mere seconds. I'd be checking the wiring to the tacho. What the tacho is telling you and what the engine/ecu is telling you are different things. I assume your ECU doesn't display the spike. So whatever is telling the tacho to be at X rpm is doing something weird. When the going gets insane, you're on the wrong path. You've ruled out plenty of things that are working correctly/aren't the issue. Your idle isn't doing what the tacho is indicating. You have two seperate issues, I don't think they are linked, and the idle seems reasonably okay unless it's stalling which.. well, it hasn't. Troubleshoot the stall if it occurs by figuring out what your IAC is doing vs what it is being told to do.
    • So awesome! I love the RB with the exhaust on display.
    • NO HITS PRICE DROP   ENGINE - $8.5k ONO TRANSMISSION - $1.8k ONO  
    • If it has had a code in the recent past, the code should still be there waiting to be read.
×
×
  • Create New...