Jump to content
SAU Community

Evo 9 - Red (Nsw) - Log Books And Low Kms - Excellent Condition


Recommended Posts

Hi,

I'm selling my evo 9, its red and has low kms (59xxx), it is in excellent condition, outside is about 9/10 and inside pretty much 10/10. I have taken excellent care of it and have only used top of the line oils and parts.

I am second owner and i bought it off a very wealthy gentleman from QLD so no expense was spared on his part either. When i purchased the car it was pretty much stock apart from the turbo back exhaust. I have since then modified little bits and pieces here and there (nothing to major).

So the reason for selling it (really didn't wish i had to because it took so long to find one in this condition as I am a very picky buyer) is because I am planning on purchasing a business and putting down a deposit for a home and land package so this money will be well used to help the purchase of these two things.

A quick run down of the car;

- 2006 Mitsubishi Lancer Evolution 9
- Red in colour
- 59xxx KMS with Log Books and manuals with all receipts of any work done to the car (and i mean every little work is documented and business cards to go along with it too).
- 3rd party Pre Purchase inspection completed on my behalf before buying it from the first owner
- I have a paint thickness gauge which you can use personally on the car to show that there are absolutely no signs of resprays or touch ups or accidents on the car.

Modifications;
- Full 3'' Custom Turbo Back Exhaust (made by a reputable exhaust shop in QLD - I will get the name when I can its in the log book and manuals case).
- x3e intercooler piping in black (upper and lower)
- Simota Drop in panel filter - retaining stock air box
- Short Antenna
- Beatrush front number plate holder
- Stock Enkei's powder coated black
- Carbon Fibre front lip
- Carbon Fibre roof spoiler/shark fins/vortex
- Carbon Fibre rear diffuser
- Whiteline Adjustable 24mm Rear Sway Bar
- Whiteline Adjustable HD Rear End links

the photos are dated for the meanwhile, but I will take new photos and attach them soon.

Some information I may have missed out on mentioning but if they come to mind I will edit the post and add it in.

Location and Price;
I am located in Green Valley, 2168, NSW.
Contact number is 0415 605 565 - SMS Pref during weekdays and either call or text on weekends.
Price wise I'm looking/asking for $38000 ono - it is really immaculate so it does warrant the price.

FOR PICS

Gumtree link

http://www.gumtree.com.au/s-ad/green-valley/cars-vans-utes/2006-mitsubishi-lancer-evolution-9-ix/1042523855

Link to comment
Share on other sites

  • 5 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Latest Posts

    • 32010-AA520 - R34 RB25DET manual transmission, you can buy this new. You'll need a pull to push type clutch converter (to use R33 clutch kits), or buy pull-type clutch (R34 clutch).   R33 part number if you're lazy: 32010-21U00     Applies: RB25DET.MT.F5; Notes: FS5R30A
    • Hi All, Ive recently pulled my head in and gotten started on my 2year long project for my R32 RB25 swap, I went into it head high and confident it was an easy swap and plug and play wiring. I was wrong. The engine is a S1 RB25 and I'm running RB25 ECU And loom. I got the swap done a few weeks ago and have been working on the car on my time off, however i cannot get the engine to run, at first the engine would crank however the fuel pump would not run,  i dove a little deeper and realised that i would need to connect the wires from the RB25 Body Loom and the RB20 Body loom. went through the ECU pinout and followed the wires from the Body looms one by one to find what was needed to start the car. Now I have rewired the RB25 loom with the old R32 Body loom attached, however i am still having issues starting the car, now the pump works but still wont fire.  The car has spark but looks very weak, however I'm suspect that its not getting any fuel. I have read a few posts related to the "Main plug" near the air intake however cannot find any information on what wiring to hook up to where.  If anyone has done this swap, or has any knowledge at all on RB25's into 32 i would really appreciate your comment regarding this, im really keen to get this car finished.  Thanks in advance
    • I know a few guys that buy/sell through USS auctions here in Tokyo, well Chiba. Not that hard actually. Be happy to help if anyone needs.
×
×
  • Create New...