Jump to content
SAU Community

Recommended Posts

As per the title, whats out there at the moment?

Thinking about a v36 Skyline, and really struggling to find anything that ticks as many boxes.

Not too keen on an EVO or WRX, and I'm after something relatively new, as in a few years old.

Needs to sit 4, can't been a big thing like a Commodore or Falcon

Prefer a coupe.

I'm on the wrong side of 35 so not sure a "hot hatch" is the right car.

In saying that, Renault Megane Trophy is def on the list at the moment.

Any things else?

Yeah thought about the AMG's but have a theory that if the only car I can afford in the model is the absolute cheapest on the market, then probably not the car for me.

M3's are also on the list at the moment as well.

I drove a mates mazda 3 mps (2006 model, cost him 17k) and it was fantastic to drive. Went like stink, handled well (bugger all torque steer), rode well, comfy seats, etc.

If I was you I'd test drive some hot hatches before ruling then out

Had the same thoughts and ended up buying a Focus ST. It was under $40k and was a great understated performance car. It has 4 doors and it goes and handles really well. Being a RWD devotee it surprised me how well it handles. It's a tiny bit cramped but overall it's a good all round package. The only major downer is the torque steer, it really really really annoys me.

Drove the megane but back then it was a lot more expensive. These days the pricing is a LOT more competitive to match the Focus ST. down side is only 2 doors. Upside is LSD and a bit classier interior.

Personally I found the ST to be an easier car to drive, get thru gears and is a less harsh ride than the Megane. Cos I do lots of k's and have a new addition to the family the 4 doors and softer ride on the ST was a good compromise over the LSD on the Megane.

http://www.carsales.com.au/demo/details/Ford-Focus-2013/AGC-AD-12866092/?Cr=7&sdmvc=1

Good luck finding anything better.

Edit: LOL...great minds, and all that :)

Edited by Cowboy1600

Had the same thoughts and ended up buying a Focus ST. It was under $40k and was a great understated performance car. It has 4 doors and it goes and handles really well. Being a RWD devotee it surprised me how well it handles. It's a tiny bit cramped but overall it's a good all round package. The only major downer is the torque steer, it really really really annoys me.

Drove the megane but back then it was a lot more expensive. These days the pricing is a LOT more competitive to match the Focus ST. down side is only 2 doors. Upside is LSD and a bit classier interior.

Personally I found the ST to be an easier car to drive, get thru gears and is a less harsh ride than the Megane. Cos I do lots of k's and have a new addition to the family the 4 doors and softer ride on the ST was a good compromise over the LSD on the Megane.

Oh, and apparently Ford are testing this stuff :

http://www.mountune.com/index.php/services/performance-upgrades/focus/focus-st-2012-onward

Spend the extra $10k budget and have a rocket....

Thanks guys, appreciate all the help.

Not sure a Focus is for me. Great cars, but maybe a little more for someone in their mid to late 20's. Just my view.

Was after something a little more luxuirous, hence the V36.

R36 for a bit more room

Thanks for reminding me about the R36. Absolutely love the wagons, so might take a look at some

Need a buyer for your N1 Bobby? :)

Stranger things have happened Tez :)

But not thinking about letting it go right now. Give it another 3 years when they're eligible for import into the US.

If you're looking at E46's, look into their rear subframe crack issue. Apparently it plagues that model.

Actually was discussing this with a mate and doing some reading. Def seems like an issue, so we can scratch those.

I might even take a few 6cyl non M model BMW's for a drive. Big fan of the coupe shapes and with the 6, might be good enough for a nice daily that isn't completely boring

Audi S4 / RS4 is getting to that price point. Can be had in wagon version.

M3 as mentioned, but also V10 M5s can be had, also Z4M coupes.

370z

You can buy a lot of car for 50k, or you can get a focus.... :/

Also 135/335 BMWs, the earlier twin turbo models are stronger than the later twin scroll.

Are you also keeping in mind Bobby, something that can be less difficult to sell later on?

Definitely mate. It's why i'm staying away from things like a 98 Series 3, 33 GTR, which is still the car i have to own one day :(

I also want something that i'm not so paranoid about and can leave anywhere.

Audi S4 / RS4 is getting to that price point. Can be had in wagon version.

M3 as mentioned, but also V10 M5s can be had, also Z4M coupes.

370z

You can buy a lot of car for 50k, or you can get a focus.... :/

Was looking at Audi S cars last night actually.

Love the 370z, just not enough seats.

V36 Coupe or Megane still leading the way at this stage.

Only concern with the V36 is a few owners in V section have experience some issues not easily fixed, and that worries me.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For sure the later RB26 variants had a different setup (6 cam voltage sender?), but the RB25DE/DET share the same ECU pinout/PCB footprint, and at the ECU plug it ends up being 'throttle sensor in' & 'throttle sensor out' (to A/T TCU) ...you stick a multimeter on these pins and you'll find them directly connected (0 ohms) ; I had an pair of Nissan ECUs on the bench long ago, and I noticed this throttle sensor in/out link, actually linked to an op-amp ...which was unpopulated on the NA board, but present on the T board and I went 'ah-ha!' in some moment of clarity... ...it wouldn't surprise me if they changed strategy here though (in the software and actual monitoring of this signal), because they did with other stuff (A/T signals).. and 0.45v as a trigger point makes sense, as that's what the external TCU units expect at idle ; kudos, thanks for that insight...I suppose it boils down to whether or not Consult can display real time data of that signal's voltage... ...in any event, it presents the same target...ie; rotate TPS unit to achieve 0.45v to suit both ECU&TCU, and where do you goto from there? Just disconnect TPSwitch connector and/or that plus TPSensor connector....or do you go for the throat and disconnect IACV solenoid and see if it still stalls? (probably throws a recoverable fault code and goes for default idle strategy?)...
    • I’m also conscious that e85 is slowly being phased out. Not all United’s have them anymore. Can’t take the risk of being low on petrol and assuming the servo will have it. 
    • MR HAMMER has said his piece. Painted up to avoid Rusty Rusty. Actually lines up well. (i.e it lines up the same as the unmolested GTR guard). Turns out the GTR Strut brace does foul on the bonnet vents ever so slightly. May need a little bendy bendy if intended to keep using with a strut brace. So spacing it out to clear the FAST102 is not an option. Annoyingly, the bonnet vents also foul on the heater lines running over the engine. Given this engine does not EVER require a heater, a delete loop is going to be used. Don't worry, the defogger uses the AC. The heater is basically "Do not use the aircon and turn the fan on". It will still be effective, I promise.... once I get the system regassed... Will have to revisit with unvented bonnet I suppose, and suitable strut brace. There's plans to do this and other things tonight and bleed brakes (there was a weep) and put the bumper back on, and take Good Friday morning - Because troubleshooting on the side of the road limping it home at midnight tonight is ... not very smart.
    • Thank you all for you assistance. I contacted Nistune regarding the support for the RB20DE along with my ECU Code (23710-10U00). They do have a map for it and added the RB20DE as a purchasable option now as well. They also added Malta as a Billing and Delivery options as this was missing. I was honestly amazed at their quick response and action, it took less than 24 hours. I also looked again at direct fit options for injectors, just in case I were to replace them. DeatschWerks seem to use a Bosch EV14 base and makes ones that fit mine at 440cc lowest, but also have 550cc at the same price. I tried looking for other direct fit options and managed to find one (also Bosch EV14 based) which includes a plug and play adapter on ebay. Did a small test with a Noid Light on the troubled injectors and all seems good, so they are pulsing properly electrically. One weird part is that they are missing on the same two cylinders as before I got the injectors cleaned. Mechanic also found this weird as he did not label the injectors and it is unlikely to have the faulty injectors be installed in the same cylinders.  
×
×
  • Create New...