Jump to content
SAU Community

Recommended Posts

I bought this engine with the intention of putting it into my old Landcruiser which I have recently sold. So the engine is sitting there no longer required and will fund the completion of my GTR. This engine is complete with everything ready to drop into another car for a conversion:

- All accessories (water pump, manifold, throttle body, coil packs... etc)

- Complete wiring loom

- Computer (or PCM)

- Exhaust manifolds

- Auto flex plate

This engine can be sold as an assembled short block with assembled heads, all accesories, manifolds, intake plenum etc... or can be sold assembled with brand new OEM gasket kit.

All engine machining and assembly carried out by SA's number one engine workshop. Bottom end was completely rebuilt with new bearings and piston rings, washed, honed, etc.

Upgraded parts include:

- Duel valve springs (153lbs)

- Comp Cams (XR265HR)

- ARP Head Bolts (Pro Series)

- Comp Cams Hydraulic Roller Lifters

This is basically a brand new LS1 engine with some upgraded parts, should make upwards of 450hp with no issue. As I have sold off the Landcruiser I just want to get the money back on what I have put into it, I can show any serious buyer EXACTLY what is has cost me down to the last cent.

Price is $4200.00 and is pretty firm and that is for the assembled short block, assembled heads and all remaining parts, accesories, wiring looms, computers, etc... ready to drop into anything you want.

Serious enquiries only please 0407 801 338

Thread will be updated with photos soon.

Edited by bigmikespec

I am only interested in getting back what I paid, genuine buyers get a copy of all receipts for everything.

Thanks mate, all the best.

One bit of information I forgot... the engine originally came out of a VZ.

Offers welcome from someone who wants a cool engine conversion project!

  • 2 weeks later...

Ok fellas, my PM is now clear... I might be able to recieve a few PM's with some offers now :) anything around the high $2k mark will get it!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
    • Do you have an IAT sensor? It's worth checking it to see. You may be suprised how little gap you actually need to flood your engine with hot air. (I tape up my airbox for a reason) :p
×
×
  • Create New...