Jump to content
SAU Community

1996 R33 Nissan Skyline Gtr Lm Limited Vspec - 1 Of 98 Made - 1 Of 14 Vspecs


Recommended Posts

Ok guy's most of you SAU enthusiasts should already know about this car and it's rarity but for those of you who don't here is a quick run down...

This is one very special and highly collectable Nissan Skyline GTR, It is the LM Limited edition with the LM = Le Mans.
In 1996 Nissan Motor Co. Japan released only 98 of this model to the japanese market and only 14 VSPEC's... this being a VSPEC it is extremely rare!! (I have an email from Nissan Motor Co. Japan confirming the limited production numbers)
The LM Limited was built to commemorate Nissan entering 2 R33 GTR race cars in 1995 Le Mans 24hr where the number 22 car finished 10th overall, this was incredible considering it was essentialy running the same RB26 motor and going up against supercars of that era like the Mclaren F1 GTR.

Limited Edition factory fitted extras:

Championship Blue duco (code BT2)
Carbon Fibre Rear Wing Blade
N1 Front Brake Cooling Ducts
N1 Bonnet Lip
Commemorative GT-R Decals on C-Pillars

This particular example has been kept to its original OEM stock form and presents itself like a new car. I am a Meticulous owner and have only put 1700 km's on it in the time i've owned it starting it up once a week and I try to get out for a good drive at least once a month... It really does drive like a new car.
I have used the best oils and filters to maintain this vehicle, Royal Purple and Nismo Veruspeed Oil Filter and HKS panel air filter.
I am the first registered owner in Australia and it came from Nissan Sales Co. f*kui - Japan where they completed an engine overhaul at 82k changing all belts etc. (100k service)

I will throw in all the memorabilia I have collected including the original dealers catalogue, blank GTR key, official Nissan Licensed Models.

The personalised plates "GTRLM" will also be sold with the car if you live in VIC.

With only a handful of these in the country this car is highly collectable and being in its original form it needs to be seen to be appreciated, it's one of the cleanest R33 GTR's going around!

$39,990
Open to reasonable offers

post-15500-0-76451700-1396434475_thumb.jpg post-15500-0-86881400-1396435225_thumb.jpg post-15500-0-19961000-1396435266_thumb.jpg

post-15500-0-88402500-1396435403_thumb.jpg post-15500-0-60394000-1396435452_thumb.jpg post-15500-0-12957000-1396435543_thumb.jpg

post-15500-0-92779300-1396435618_thumb.jpg post-15500-0-08637800-1396435668_thumb.jpg post-15500-0-41156300-1396436241_thumb.jpg

post-15500-0-32545300-1396436114_thumb.jpg post-15500-0-25482100-1396436727_thumb.jpg post-15500-0-85540000-1396436193_thumb.jpg

  • Like 2
Link to comment
Share on other sites

  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • That's true. However, this problem has started since the tuning. First time with the return journey from the tuning. But yes, the pipe was clogged with dirt and rust. That was certainly due to age
    • Great info @tidi0x  Will definitely be handy for others and maybe me if I decide to keep the shit box H pattern.
    • Bumping this up one last time.... I wanted to follow up on the clutch slave issue. I realized that what the issue comes down to is the pocket is flat milled, and the cylinder does not want rest flat. So in order to mount it correctly you will need to make a spacer for the fingers so the cylinder is floating. I took two plates of aluminum, drilled some holes and was good. I did still need to make the relief cuts in the bell housing, as even with the spacer the bleed section still interferes. The OE bell housing the mounting holes are raised from the housing.       
    • If the event in USA goes ahead will be interesting as it seems the rules will get more cars over here. Apparently the track is laguna seca too. Yeah s15, if I get a the lower dash trims, centre console and change front cross member to standard LCA position will fit clubsprint. See how rules are as i would rather do complete widebody than a bolt on flare to run the 295 with proper clearance.
    • If the car is legal height I can't see it being an issue. Found a thread on reddit that might offer some insight.   I got a ticket from a copper in QLD for my S15 being too low. They had this wheel thing on a stick that they put under the car and it hit my exhaust. Anyhow went to an exhaust shop to get the exhaust tucked up/hung a little higher and I wound the coilovers up a smidge. Don't think I even had to go back to the police station unlike when I got defected for having a carbon bonnet when I brought the S15 from the ACT to QLD and had to replace it and then rock up at a police station and have a yougish female officer who knew nothing about cars confirm that I had changed bonnets. Should have just painted the carbon bonnet yellow to match the rest of the car lol
×
×
  • Create New...