Jump to content
SAU Community

Recommended Posts

I have a complete TV setup for sale.

Comes with the HiTV Digital tuner, SpecDock(for I phone 5...can convert to Iphone4), English Language conversion, Override switch and all cabling. If you any good at wiring I can explain how to put it in or I can do it at a cost.

Link to comment
https://www.sau.com.au/forums/topic/441650-tv-upgrade-m35/#findComment-7253021
Share on other sites

Issue with tv tuners is if u change regions ypu need to retune. As car is moving (not recommended) signal strength changes and causes screen to freeze or flicker. This is based on my experience. I have recently removed my tuner and gone with a sony double din dvd player ($349).

Link to comment
https://www.sau.com.au/forums/topic/441650-tv-upgrade-m35/#findComment-7253329
Share on other sites

  • 6 months later...

Has anyone actually hooked up a Raspberry Pi and been happy with the results.

Why I ask, is I have a 2005 stagea M35 with factory Nav/TV etc and connected my Raspberry Pi via the aux input at the factory TV tuner box in the rear left quarter.

I have tried two different ways to connect the Raspberry Pi, one via the analogue video output using RCA cable and 3.5 phone jack for sound out connected directly to the aux ( VTR ) input.

This gave me a good sound, but picture quality on the factory screen was fairly poor.

The other method was using HDMI output from the Raspberry Pi then via a HDMI to composite adaptor out to the aux ( VTR ) input again. Results again were much the same, good sound, but picture quality was average.

I'm using XBMC on my Raspberry Pi.

I would like to get this so the picture is of good enough quality that I can easily read the words on the screen without them being a little fussy and very small.

I guessing this may be a case of changing settings in the workings of XBMC maybe, but as of yet I have not managed to be able to change the screen resolution size to see any difference in what I see on the small car screen.

I know if I changed the screen to one that had HDMI input, that I would get a lot better screen picture, but I would think the factory screen would still give reasonable results.

Before anybody suggests taking my car to see who ever, I just wish to point out that I'm in New Zealand.

I'm happy to change any wiring, or direct link something into the factory tv tuner if that is needed.

Any help with this would be much appreciated.

Rotaman

Link to comment
https://www.sau.com.au/forums/topic/441650-tv-upgrade-m35/#findComment-7413633
Share on other sites

Try setting your device to play ntsc format instead of pal that you probably have it set too. Does your screen appear also in black and white. Never had a problem getting a decent picture upto the screen

Link to comment
https://www.sau.com.au/forums/topic/441650-tv-upgrade-m35/#findComment-7413783
Share on other sites

The Raspberry pie outputs in NTSC anyway via the analogue output at around 640p and in HDMI mode it outputs at 1080p then via the HDMI to composite adaptor it is set to NTSC mode on the adaptor. I don't think this is a device problem. I think it is something in the settings of XBMC and I have'nt managed to work out how to change the screen resolution size so that what you see on the screen is large enough and clear enough to see.

Thats why I am looking for someone that has setup a Raspberry pi in their car using XBMC as the media centre.

Unless someone has a better Media Centre they can suggest that will work on Raspberry Pi.

Thanks

Rotaman

Link to comment
https://www.sau.com.au/forums/topic/441650-tv-upgrade-m35/#findComment-7413873
Share on other sites

I don't think you're going to get it much better, unless you change the screen to one which accepts a digital input and/or can display a better resolution.

The small writing on my screen is just legible. Down scaling from HDMI to composite is really not a better idea in terms of quality.

All in all I find the TV more a novelty that comes in handy when waiting for someone or reversing, so I rarely use it.

Link to comment
https://www.sau.com.au/forums/topic/441650-tv-upgrade-m35/#findComment-7414070
Share on other sites

  • 9 months later...

The sound will keep playing when the hand brake is released. It is only video that is cut. Also you will need to do more than earth the handbrake. Unless you plan on driving under 5kmph. There is a speed sensor wire to cut. It is behind the DVD rom.

The best way to remove video block is to get it done programatically.

Link to comment
https://www.sau.com.au/forums/topic/441650-tv-upgrade-m35/#findComment-7593829
Share on other sites

  • 5 months later...

Yeah , not interested in tv, just had trouble with picture on my mini media box.

It was black / white and fuzzy, and I also managed to get it in Chinese so was guessing in the menus.

Set to NTSC and found english, works fine.

Had to make my own lead with Jaycar 4 pin connectors.

Shaved them a bit, glued them together, then had to hack out the socket on the tv tuner a bit too.

Got a good fit in the end.

Soldering was a bit fiddly.

Mounted it up on the rear window shelf so the remote works from the front.

Got 16Gb of music in that thing.

No more cds... :rofl2:

post-25026-0-77423800-1454389481_thumb.jpg

post-25026-0-25723900-1454389494_thumb.jpg

post-25026-0-58882200-1454389519_thumb.jpg

post-25026-0-16445800-1454389535_thumb.jpg

Edited by conan7772
Link to comment
https://www.sau.com.au/forums/topic/441650-tv-upgrade-m35/#findComment-7676435
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Actually,  just remembered there should be info in the threads (somewhere) about swapping to a manual steering rack and deleting power steering all together. 
    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
×
×
  • Create New...