Jump to content
SAU Community

Recommended Posts

Hey guys,

Quick questions to the engine savvy people, just over two weeks ago i purchased a Dealer X-Demo 2013 Nissan Pulsar ST-L with about 6000 kms on the clock, after a week of driving i started noticing it had a rough idle whilst stopped at traffic lights, i looked at the RPM Tacho needle which was moving between 600 rpm to 800 rpm sometimes eventually it will settle at about 700 rpm but still move ever so slightly, whilst my foot is on the brake i can feel the engine like shaking slightly, as if its about to stall but doesn't. Almost as if it just can find a idle hot spot.

Yesterday I took it to a Nissan service centre and go one of their techs to look at it, he took it for a test drive and said whilst driving, "oh these models just have a rough idle, not much can be done about it" he said he would hook it up to the computer and re set the idle. I drove it home and felt like it was fixed, didn't really see the Tacho jumping around nor feel the shake, however this morning i drove it to work and it came back again. I rang another service centre to get a second opinion and i spoke with a knowledgable person there who said last year Nissan did an upgrade of the ECU but it caused it hunt whilst in idle. Hopefully he can help me so I am taking it to this guy tomorrow however i just wanted to get some quick advice in general.

Should the RPM needle be moving at all? and should i even feel that stalling shake on the engine? To me thats not normal, i do not want a new car with that sort of an issue, it doesn't seem right to me.

Thanks in advance

Jay

no it doesnt seem normal.

Jump on Pulsar Group Of Australia and make a new thread. plenty of experience and skilled ex-Nissan employees there. we would love some problem solving on the new C12 platform.

Perhaps some build up on the throttle body?

I would definitely keep this in mind, but doesn't really seem like an issue to cause unstable idle. and I don't think jukes have been having issues with gunk build up.... not yet anyway...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’d love to find some where that can recover the dashes to look brand new and original. Mine has a very slight bubble, nothing compared to some I’ve seen though 
    • $170K. I asked one of the guys there as a joke if that price was just for the passenger seat as it was where the price sheet was... he tried really hard to crack a smile 😄 He also mentioned that every single part of the car was inspected and either restored or replaced with a new or as new part, or made from scratch. The interior was incredible, every inch like a new car.
    • Time for a modernisation, throw out the AFM, stock O2s, ECU into the e-waste bin. Rip out the cable throttle, IACV, pedal, etc. into the scrap metal bin. DBW, e-throttle, modern ECU, CANbus wideband, and the thing will drive better than when it left the factory.
    • I agree, don't go trusting those trims. As I said, first step is to put the logger away, and do the basics in diagnosis.   I spend plenty of time with data loggers. I also spend plenty of time teaching "technicians" why they need to stop using their data loggers, and learn real diagnostics.   The amount of data logs I play with would probably blow most people away. I don't just use it to diagnose. I log raw CAN data too, as a nice chunk of my job is reverse engineering what automotive manufacturers are doing.
    • I'm aware, but unless you're actually seeing the voltage the ECU is seeing and you're able to verify the sensors are actually working I find it hard to just trust STFT/LTFT. I will say, logging the ECU comes naturally to me because it's one of the lowest effort methods of diagnosis and I do similar things in my day job all the time. Staring at 20+ charts looking for something that isn't quite right isn't for everyone. NDS1 allows you to log almost everything so that's normally what I do and then sort out the data later. 
×
×
  • Create New...