Jump to content
SAU Community

Recommended Posts

Hi guys just a quick what is the most power you can get from a 2.5 neo engine from the skyline 25gt without going turbo or supercharged and what would kind of price Range are you looking at?
Is it possible to get around 300hp ?

If you don't mind spending about 20k on building an engine and then rebuilding it at every oil change then you might get 300hp. But it will drive like crap, use heaps of fuel and be exceptionally unreliable.

  • Like 1
  • 2 weeks later...

Should just by a magna ey Marc ;)

But yer not a hope of going 300hp (even at the flywheel), would need massive compression, huge cams, itbs.... Although, I shot of giggle gas would liven that boiled egg of an engine up :)

300hp is equal to 220kw, something which not even a stock r34 gt-turbo makes.

Anyways that being said, If you are keen on dishing out 5k+ some guy posted on youtube of his n/a r33. Got 140rwkw out of a N/a, which equates to around 200hp at the wheels.
Initially it was making 92rwkw, so considering its 140kw at the fly from facotry it should be: 140-96= 44kw. 140+44 = 184kw at the fly which is 250hp once modded. So if you spend 5k you can get 250hp, not impossible :P

He lists his mods in the description:

Up until the ferarri 458 came out, the F20C in the Honda s2000 was the most powerful naturally aspirated engine per litre in a car and that made approximately 124hp at the flywheel per litre. 248hp with 2.0L . The F20C is a supremely different engine to the Rb25de. the Rb25de was not made for power, that's what the Rb25det was for.

Is it possible to make 300hp from a smaller capacity N/A engine? Yes. Is it possible to make 300hp from an rb25de? Possibly. Can do you it for less then you'd make 500kw from an rb25det? No.

It's definitely not worth you time or money.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update: I got the magnet out. I bought 3 different flexible magnetic reach tools, but none of them worked. The magnet on the tip was all less than 2lbs of force, so i had to buy a special cylindrical magnet that had a pull force of 9lbs.  The magnet finally came in the mail yesterday, so i got under the car to get to work. The super strong magnet isn't that long, so i only have about 1 finger pinch lengths to hold it. I was so scared when i was going in the hole, that the 9lb magnet would just fly away inside the oil pan never to be seen again, but i had my butt cheeks clenched and finger gripped on that thing so tight, i managed to get it to suck the other magnet out.  It was a victory for me last night.         
    • Yep, pretty much what you said is a good summary. The aftermarket thing just attached to the rim, then has two lines out to valve stems, one to inner wheel, one to outer wheel. Some of the systems even start to air up as you head towards highway speed. IE, you're in the logging tracks, then as speeds increase it knows you're on tarmac and airs up so the driver doesn't even have to remember. I bet the ones that need driver intervention to air up end up seeing a lot more tyre wear from "forest pressures" in use on the highway!
    • Yes, but you need to do these type certifications for tuning parts. That is the absurd part here. Meaning tuning parts are very costly (generally speaking) as well as the technical test documentation for say a turbo swap with more power. It just makes modifying everything crazy expensive and complicated. That bracket has been lost in translation many years ago I assume, it was not there.
    • Hahaha, yeah.... not what you'd call a tamper-proof design.... but yes, with the truck setup, the lines are always connected, but typically they sit just inside the plane of the rear metal mudguards, so if you clear the guards you clear the lines as well. Not rogue 4WD tracks with tree branches and bushes everywhere, ready to hook-up an air hose. You can do it externally like a mod, but dedicated setups air-pressurize the undriven hubs, and on driven axles you can do the same thing, or pressurize the axles (lots of designs out there for this idea)... https://www.trtaustralia.com.au/traction-air-cti-system/  for example.... ..the trouble I've got here... wrt the bimmer ad... is the last bit...they don't want to show it spinning, do they.... give all the illusion that things are moving...but no...and what the hell tyre profile is that?...25??? ...far kernel, rims would be dead inside 10klms on most roads around here.... 😃
    • You're just describing how type certification works. Personally I would be shocked to discover that catalytic converter is not in the stock mounting position. Is there a bracket on the transfer case holding the catalytic converter and front pipe together? If so, it should be in stock position. 
×
×
  • Create New...