Jump to content
SAU Community

Recommended Posts

HKS EIDS

HKS idle Stabilizer. Helps solve the stalling problem caused by most ATMO BOVs.

Comes with Computer, Loom and Instructions.

PriceSOLD (UAS have one for $280)

Buyer buys postage from SA. Prefer Direct Deposit, COD maybe.

in excellent cond.

Thanks, Dean

Link to comment
https://www.sau.com.au/forums/topic/44218-fs-unichip-ebc-and-hks-eids/
Share on other sites

calemb : If uve ever installed a car stereo, then u can easily install this. U need to tap into only 8 wires. Took me 10 mins to install.

Yes it works on autos

Yes it works with other EBCs however it works as good if not better then the brand name ones. Buy this, and sell the brand name one if u r happy with it, and u saved urself a shitload. :)

Pics Finally,

Sorry about the crapness of them, my camera isnt workin so i had to use my el crappo one.

Pics are Unichip and Boost controller Modules

Wiring loom pic of boost controller and Unichip (Still attached to my car)

Thanks

Dean

read this link... it tells you why you should install a unichip intto your car.

http://www.airpowersystems.com.au/unichip/unichip.htm

The Unichip not only enhances power and torque across all throttle positions throughout the entire rev range, but significantly enhances throttle response, driveability, fuel economy and outright acceleration.

gtr_rb26.gif

James.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm thinking that this is such a small part of the problem that you could easily forego the vac pump and just achieve 90% of what you need, which is keeping the gate open when off boost. It's not as if there are not already techniques to keep a gate fully closed under boost. After all, you have boost. Just use a wastegate actuator that will allow you to apply the boost on the appropriate side, just like every external gate out there.
    • Heres another fitment photo. redrilled the pattern to 5x112, and threw my audi´s rims on. had to touch the upper control arms with grinder, because the "sharp corner" was sticking about 2-3mm on the tire path. i have the "fender lip" mostly cut off, otherwise these (too) would contact with it. 20x9.5 ET25 rear    265/30 20x8.5 ET20 front    255/30 they are temporary, and look too big for the chassis. searching for 19s to it.
    • From experience, it will come back to bite you haha.
    • Background: my BMW 225i hatchback (rebodied MINI/X1) came with 3x RE003 and 1x Goodyear Asymmetric something. The RE003 roared and slid around, the Goodyear side was quiet and grippy. Definitely my car was thrashed before it got sent to dealers. My brother also got RE003 all round on his old VA WRX STI, I wasn't impressed with them, car was loud so can't comment on noise. Anyway, Hankook stopped making/updating V12 Evo2. So bought S1 Evo3 runflats. Great daily duties tyre and not that harsh ride. Tyre reviews site/youtube rated them as best stopping in the rain and I believe them. Next set, Goodyear Asymmetric 5 non-RFT. It beat PS4 in tests and is like $100 cheaper, so put them on. Great tyre, more grip then S1 Evo3 but a tad noisier as expected, still rocking them. Next set I am looking to go runflats, probably the new Hankook Evo. Although the new Pirelli PZ5 did well in tyrereviews test. Or go Goodyear Asymmetric 6 which was top tyre last year. The V12 Evo2 on my gen5 Liberty GT wagon did great in cold condition (drove to snowy mountains for a day so my husky can feel his ancestor's roots). Super impressive performance for $120 each lol. Never skimp on tyres, brakes, suspension. There's old pics of my R31's crappy random brake pads bending in the caliper at Oran Park track day somewhere around here. Anyway, my 2 cents.
×
×
  • Create New...