Jump to content
SAU Community

Recommended Posts

As the title suggests my skyline sounds like it's missing.

I bought this car as a doer upper and have since got it running and 99% put back together but now I've got another issue

THINGS I HAVE ALREADY DONE ARE.

I have checked for air leaks with pressurised smoke.

Also tried the carbi cleaner trick but no change.

I have replaced the plugs but no change.

I have replaced the coil packs with red split fires.

I have checked timing marks all line up. and they do.

I have checked the wiring. NO PROBLEMS

TODAY

I'm going to take off 1 coil lead at a time and see if I can find which cylinder is playing up.

I haven't done a comp test yet.

I have heard of people going through a years paycheck finding the issue and it turned out to be a bum coil or plug. But seeing as there both new they should be ok.

I will keep this post going so just maybe I can save others from waiting time and money.

post-113589-0-94753700-1398484164_thumb.jpg

post-113589-0-92451100-1398484316_thumb.jpg

Right. Job done.

What I done

I started be removing the plugs to the coils

Started with No#1. NO DIFFERENCE.

No#2 NO DIFFERENCE.

No#1 and No#2 NO difference (Weird I know)

No#3 No#4 No#5 No#6 all made a difference.

Pulled No#1 coil and Plug out and earthed it and it put out a nice big spark.

Pulled No#2 coil and Plug out and earthed it and it put out a nice big spark.

So I replaced them both coils and plugs and removed the

No#1 Injector plug. I put an LED into it and it was pulsing.So then I removed the No#1 Injector.

A couple of the yellow bits on the pintle were busted. But other then that it looked fine.

I removed the fuel pump fuse and turned it over whilst holding injector in my hand

and if it was working I would have felt a CLICK CLICK that they make when there

pulsing the fuel in. NOTHING.

Thought it might need an earth so I sat it in an earth but nothing still.

RESULT.

All coils were firing on time with the timing.

All plugs were receiving good current and producing more then ample spark.

All injector plugs were fine and all were making good pulse.

All injectors except No#1 & No#2 made pulse.

SOLUTION

REPLACE 2 injectors with ones borrowed from a friend

And see if that fixes the issue. If so. Replace ALL INJECTORS and top half inlet gasket

And some pipes that are hard to get to unless the intake is separated.

NEXT UPDATE WHEN I GET SOME INJECTORS.

  • Like 1

Do a compression test - you may have broken rings on 1 and 2 - you would be amazed at how well an RB25DET can go on four cylinders!

And try a known good CAS to see if that makes a difference (you can often tell a dud CAS by trying to spin it when it is off the car).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey lads, reviving an old thread.  As an update, since the last time replied to this thread, ive done mostly suspension. Havent touched the motor except for maintenance. Though upon changing spark plugs, found out i had splitfires pre-installed! Updates: - Got me some stock airbox top cover and snorkel to fit onto the original intake. Should be free of defects - Bought a set of R34 GT-T brakes (not installed yet, going to rebuild + respray in champion blue + white 'Nissan' text) - Bought the last set of bilsteins from @Sydneykid and had them installed. Has been making some sounds on the rear but hopefully should be sorted out after this New Year break. - Regreased front caster rod bushings (poly bushes..) - Rear upper camber arms - Whiteline sway bars (BNF27Z 22mm + BNR11XXZ 24mm).  The rear sway bars are a bit short (ive read 50mm else where) but was still able to get them in.  Anyhows, I reckon suspension is sorted now. Maybe replace bushes (do have a set of front upper control arms from SK not installed yet) but should be okay for now. From now, I'm wanting to start working on the motor, drivetrain etc etc. Still debating on the order to go on and what to buy etc but: - ECU ( Haltech or Link ( Link states that it dont support A/T or AWD functions... Can anyone attest to this? ) - Highflow turbo ( ATR43ss2 ) - Intercooler ( Not decided yet, but cant find many good afoordable ones. Toshi says to opt for crossflow Japanese. Bit difficult this one, unless I get a returnflow Blitz from JJ? ) - Injectors ( Any recommendations ? I do have a nismo FPR ( Thanks SK ) ) - Seats - Tune by either Toshi or DVS To be fair, I did consider just keeping the stock turbo and nistuning it. Sat in a mates stock N, that had something like 200kw, and I reckon that felt more than enough. Maybe I should just go this route ahhaha. Too many choices.... Planning a trip down south, so wanting to just clean things up and make sure it gets to and from in one piece. Anything else specifically I should do before ? Cheers lads  
    • Must be for the car’s lucky charm 🤷🏽‍♂️ She runs fine, but it just seems to take about 1L less. Maybe I’ll have the oil sump dropped at some point to check if there is anything 
    • Hmmm interesting. Mine is the exact same and clearly the right one.  The mystery of the engine oil being full after 3.5-4L continues 
×
×
  • Create New...